Search the Community
Showing results for tags 'vga'.
Found 5 results
Access to RGB and HV signals on the motherboard - YES. Output voltage correction/boost - Can be made. Bios - what bios to use? Since all custom bios are fake VGA mode. Talking about REAL VGA, bypassing encoding chip and directly tapping into nvidia chip.
Hi guys, Looking for some feedback here. I have seen a VGA cable that is detected as component by the Xbox. Seller states its similar to the Frosty VGA cable. I have UnleashX on an Aladdin XT2 with Xromwell running on a v1.2 Conexant Xbox. My TV handles YPRPB component signal through its VGA input. Anyone got experience here, Ive seen old posts about certain BIOS for VGA but cannot really follow whats being said due to my inexperience. Do you guys reckon the cable will work with my configuration? Heres the cable... https://www.ebay.co.uk/itm/Original-Xbox-VGA-Cable/143347461008?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160908105057%26meid%3D4e45587c267d4ab7a06d54be3c0b2a20%26pid%3D100675%26rk%3D1%26rkt%3D15%26sd%3D143330087113%26itm%3D143347461008%26pmt%3D1%26noa%3D1%26pg%3D2380057&_trksid=p2380057.c100675.m4236&_trkparms=pageci%3A1dd926d6-f65e-11e9-b466-74dbd180baa1|parentrq%3Afdd9c30a16d0a4b7fd020259fff76961|iid%3A1
Hi everyone, I just introduced myself in the "new members" section. And now I have a bunch of questions covering different topics. I have a softmodded XBOX that I modded like ten years ago. I do not remember what softmod, what exploit, did I tsop-flash...? My setup is as follows: XBOX 1.2-1.5, 2.5"Sata-hdd, laptop-dvd-drive, VGA-connector on the back with a DIP-switch to choose vga-video-mode (so obviously i did a tsop-flash?), and usb-connectors on port 3 and 4. Everything is running again after some major issues. The box is booting to xbmc 3.0 and I can watch movies and play games from HDD (I can not find my game-dvds). But since I can not remember what softmod is installed, or what bios is flashed I want to start over. I only want to keep my games from the HDD. My plans are as follows: backup games via FTP, backup eeprom, install a new softmod, NULL the hdd-code, ( I may want to upgrade the 160GB hdd at some point), rebuild the HDD from scratch, install the latest XBMC is this the best order? what are the best methods for doing so? what software do I need (Tool-DVDs ?)
I got a couple of VGA CRT monitors from a friend, and want to know what is the cheapest, an easiest option for VGA output on the Xbox? I know there exist tutorials for modifying an HDTV pack, but I am not very good with soldering, nor ready schematics. Sent from my SM-G955U using Tapatalk
Board Life Status
Board startup date: April 23, 2017 12:45:48