Search the Community

Hello guys, I tried to change large hard drive by use Chimp application, but show this error message. Could you help me? I am not sure what step is wrong. My process step as below: 1. Console turn-off, plug new hard drive power. (no connect IDE bus) 2.Console turn-on, my console already softmod by hotswapping 3.Run Chimp application 4.Take out DVD IDE bus and plug to new hard drive 5.I saw console show some message, should be OK 6.Go to dialog box, but show this message, "slave device can not be locked" And I check program function, slave device function is disable. By the way, before plug new hard drive, I format by FATXplorer. Any mistake of the procedure? Need you help! thanks so much!

Hello, I came across this site while searching for solutions to my problem. I was attempting to upgrade my XBOX HDD to a 1 TB WD SATA drive that is listed as lockable. I followed Mr. Mario's tutorial on Youtube to a T, and it appeared to be successful, however upon powering up with the new HDD in place of the old I get error 07 and on occasion 09. When going back and attempting to use Chimp to re-clone the original HDD to the new drive, the new drive cannot be altered due to it being locked. Attempts to unlock the HDD via the Unlock Slave Drive menu in Chimp do not work, all of which lead to the same screen referencing the password from the motherboard, but changing nothing. How do I unlock this drive? And yes, I have the jumpers currently set to slave, and had them set to master when I attempted to utilize it as the master HDD. Any help is appreciated.