Search the Community
Showing results for tags 'finished:'.
Found 2 results
I thought that all of the original Xbox forums online were all gone/dead. It's great to see that there are still active ones to be found! For my first post I wanted to share one of my first Xbox consoles I modded. Its nothing special, just something designed to be used at events where hundreds gather where I wont be afraid to have any number of random visitors using it. The Xbox itself is simply softmodded and it has been reworked to use a 2.5" SATA HDD. From the 120gb it now houses coinops and a number of modded Halo, Timesplitter and Battlefront games. The idea is a very multiplayer friendly console that is intuitive to use. While it has an XBMC dash, it boots directly into coinops so any number of people can use it without having to ask what to do. Before I upgraded the HDD I took a snap of the original guts while I was working on the console. The HDD is sitting on a spacer above the motherboard to allow for increased airflow, done after the capacitors were rewired and replaced. For fans I am using a Sunon for exhaust and the famous Iceberq 4 for the chipset. The PSU has been wired externally similar to a laptop. While I could have used a picopsu, this defeats the purpose of the console being cheap, easy and worry free with strangers using it. It's nothing fancy. But it looks great, its robust, it doesn't overheat after 12+ hour sessions, I have very little money invested in it and I built it so I wouldn't be afraid of strangers mashing on it.
As always, the finished product goes first. The system is a XChip modded xbox running XBMC. Has 4,000 games backedup on it (Coinops-NES, Atari 2600, N64, PS1, Arcade games and everything inbetween. Including some PC game ports as well as backed up Xbox games with custom maps and features). But, there's a twist. It can use original, unmodified NES controllers. And full SNES controllers with a simple SNES>NES adapter (Fun fact, they have the same contacts, just different plugs). This is designed to be a very long lasting Xbox. It runs under 100 degrees Fahrenheit and everything is plug n play so if I need to change the motherboard or PSU out its as easy as Legos. And as always, the unit is designed to be used by strangers at large events when its not sitting in front of my own TV, so its built quite rugged. For the case I went to eBay and simply searched "aluminum enclosure" until I found something I liked. When it arrived, it looked something like below. Then I used a drill press to slowly and methodically drill out the holes I wanted, then I filed them down. Luckily I no longer have to do this method for my consoles as I found someone who can reliably mill my holes out for me. While this method worked, its missing that final 5% that really makes you go "wow". For the NES ports, I used a microcontroller to imitate the OG xbox controller and let me use unmodified NES controllers instead. To switch between the NES and Xbox controllers, you just have to push the button next to the controller port, its that simple. I have adapters to allow me to use SNES controllers as well. Luckily its just a physical difference for the plug, like having a USB-mini to USB micro adapter. While I like the duke controller, I can now use more simple controllers for games that dont required joysticks. While its tempting to have my new contact professionally remake a front bezel for me to really polish it off, I would rather that money go toward a new project.
Board Life Status
Board startup date: April 23, 2017 12:45:48