Search the Community
Showing results for tags 'xblast'.
-
This can be a pretty idiot question, but are any xblast lite pcbs gerbers files available online? I want to start making those, I have experience making openxenium modchips, I have done quite a lot of those. Also some knows a reputable link to SST49LF080A?
-
Hey Everyone, I recently flashed Cerbios on my hard modded xbox via the OGXbox 2021 1.9.3 DVD. Now that Cerbios is on my xbox I'd like to use Xblast OS to flash the bios on my Xecutuer 2 chip with an updated version of Cerbios. Xblast OS is currently sitting in C drive as well as E:\\Apps\\Xblast\\xblast os.xbe. If I run the xbe file the screen goes black and the xbox eject ring starts to flash red and orange. Nothing happens for ten minutes. What am I missing? Starting to wonder if it's the Xbox High Definition AV Pack that I'm using to hook up my xbox to the TV. Any help is greatly appreciated.
-
https://youtu.be/U9RTT-PHad8 Aladdin Xblast Modchips Domestic: $20 USD SHIPPED TO USA International: $20 USD SHIPPED TO MOST PLACES (minimum order, 4) **21 Available** more on the way Features: -1MB 49LF080A LPC Flash -Supports 1x 512KB Bank and 1x 256KB Bank, also lets you boot from onboard TSOP!! -Banks are software controlled from XblastOS embedded into Bank2, -NO SWITCHES! -D0 point for 1.0-1.4 Xboxes -Dedicated LFRAME point for 1.6 xboxes that releases after boot to avoid damage. -Pre programmed with the 1.6 versions of X2 5035 F and G and M8+. -Reflash banks easily direct from XblastOS. https://youtu.be/U9RTT-PHad8
-
Having an issue with a 1.3 xbox that I've never run in to before that I can't find a solution to. Using this xbox with any type of xblast chip/80 wire ide and any type of ide to sata adapter(including startech), the xbox will not boot the bios no matter what. When I push the power button it will always boot to xblast then I need to manually choose the cerbios bank to boot from and then it works fine. I've tried replacing the modchip with various other xblast type chips, replaced the ide cable, replaced the sata adapter, replaced the HDD, replaced the dvd drive. Nothing will work. I obviously have quickboot set and the power button boot bank set to the cerbios bank. It seems to ignore all these settings and always boot to xblast first. I'm at my wits end here as I've never seen this issue before and no matter what hardware I swap out I can't figure out the cause or how to solve it.
- 4 replies
-
- xblast
- aladdin/jafar/lite/etc..
-
(and 2 more)
Tagged with:
-
After bought and flash CPLD in Aladdin Advance(was selling as XT2+) I've need figure out why fragging my 1.6 consoles. Debugging with datasheet of LC4032V I've discover jumper between B8 and B10(L1 and D0 respectively in XT)... Just cut B8 trace and solder wire directly in pin leg. Profit!
-
I am trying to program the CPLD of a Xblast Lite that I built. Got the PCB from a friend. I flashed the tsop on the chip successfully. The cpld seems to be programming, but the xbox still frags when I try to boot with the chip. I am using the Flashcat USB programmer and software. The file I am flashing is XblastLiteV1.xsvf: https://github.com/Kekule-OXC/xblast_lite_cpld/tree/master/xilinx_ise I am not 100% sure that this is the right file, but flashcat seems to not work with jed files, so it is my only option at the moment. The output log of flashcat says that I flashed successfully, but first it says "SVF Player: Failed sending XSDRTDO command (line index: 20)" so I am wondering if that has anything to do with the fragging. Does anyone have experience with this? Here is the log from flashcat: Disconnected from FlashcatUSB Classic device Connected to FlashcatUSB Classic, firmware version: 4.56 BSDL database loaded: 26 total definitions JTAG TCK speed: 1 MHz JTAG chain detected: 1 devices JTAG TDI IR chain size: 8 bits Index 0: JEDEC ID 0x59604093 (Xilinx_XC9572XL_(VQ44)) JTAG engine setup successfully JTAG index 0 selected: Xilinx XC9572XL (IR length Checking for a device specific script to automatically load Button Hander::Calling Event: RunXSVF Running XSVF file in internal JTAG XSVF player SVF Player: Failed sending XSDRTDO command (line index: 20) SVF Player: TDO: 0x03FFFE SVF Player: Expected: 0x000001 SVF Player: Mask: 0x000003 XSVF file successfully played Button Hander::Calling Event: Done
-
Hi. I was just finishing a successful repair to a 1.0 with a bad psu. Replaced psu, replaced clock cap, flashed Aladdin with Cerbios, updated hdd. Everything was working fine, dashboards, games, etc. Closed up the case and as a final thought decided to increase fan speed using Xblast OS. Loaded Xblast, set fan speed, hit reboot and... Frag with Christmas lights! Any ideas?
-
Looking to buy one of these for a bad flash TSOP recovery. Not interested in the Aladdin Xblast. Thanks!
-
For sale a Aladdin Xblast 1mb modchip. 512kb bank is flashed with M8+ 1.6 with LBA48 version 3 support Asking $25 CAD Canada Post standard shipping only! included in price. Canada Only! e-transfer only! PM if interested thanks.
-
I have the Aladdins. I made the jtag cable with 3.3v output utilizing a USB blaster. I managed to get the drivers installed in windows 11. I have the XBlast Aladdin svf file. I have quartus. I have a tl866II. I have the SST flash adapter for the xgecu. I have 1mb flash chips. I should have the software installed for the SST flashing. I have everything. Just don't know how to use the software. Tried urjtag and it just gave me bullshit errors and I don't wanna fuck with it. What do I do? @sweetdarkdestiny @KaosEngineer @SS_Dave @ModzvilleUSA
-
Hey guys, just wanted to let you know the store has some new inventory on xblast chips. https://gameroomcustoms.com if you have any questions, please let me know!
-
Want to know where I can source the modchip if I decide to use one? I want to avoid border fees so that is why I want to know if anyone in Canada sells them? Just as a backup plan.
-
Hi I have an issue with another xbox of mine. when I want to save changes in xblast it only shows the background and does not reboot, but changing in the menu does work/ fan speed does change exepte it does not wanna keep it. I testet 3 chips and all have the same issue. this Xbox had a leaked clock cap and two traces where rotten but everything else works fine. example: Gruß Hero
-
I tested the chip. It works. It will not boot when D0 is activated in a 1.3 motherboard. Solder points should be good. Chip DOES have power and lights up. @Dtomcat18
-
XBlast-Lite v1 Features include: 1MB flash support (SST49LF080A). Split as 512KB user bank, 256KB user bank, 256KB OS bank Full XBlast OS software support Parallel character LCD support, with backlight and contrast software control (HD44850) High-speed, high-current driver for D0(1.0-1.5) and LFRAME(1.6,1.6b) Chameleon/Matrix TSOP recovery (A15) Software-controlled TSOP split(1.0,1.1) General purpose inputs/outputs Status LED Chihiro mediaboard basic spoof (Reports as 1024MB FPGA mediaboard) Bank flashing & software control support in Evolution-X dashboard (Chameleon Modchip emulation) Support for 1.0-1.5 no solder adapter (D0 routing) Pictures : https://imgur.com/a/rUy4mO8 The chip comes with pin header as shown in the pictures and some awg30 wire for DO. The chip is pre flashed with Cerbios UDMA2 on the 256kb bank and Cerbios UDMA5 on the 512kb bank. XBlastOS is version 0.60. For the LED you can choose between : Green, Blue, Red, Yellow and White. Optional you can get an HD44850 display (Blue or Green) like shown in the pictures. Cut to size to fit like it should without losing controller ports 3 & 4 (A full frontpanel would also be possible). Price 35,- €uros for 1 or 90,- €uros for 3. Payment through bank transfer. (So this offer is probably only for EU users of interest).
- 9 replies
-
- 2
-
- xblast
- xblast-lite
-
(and 3 more)
Tagged with:
-
This is my worklog. I'll post pics and thoughts! Why am I sharing this? Because I can! Modding the other 1.4 halo console tonight with an XBlast Lite from Tomcat. I don't have to share such a routine procedure, but I feel like doing so. I should celebrate: I will finally start receiving the income I've been waiting for and I'll have all the time I want to learn new skills and get better at the things I've always wanted to learn. I will also be able to invest in consoles and get a little bit of everything and try to get some broad experience with all there is available. Oh and I bought a shitload of pinnheaders. I can mod like, 60 Xboxes now. I'm unsure of what to do for sure with this console. I don't know whether to keep the chip in, or just use it to flash the TSOP so I can sell the console. But it will have another 2tb origins drive in it, just like my X3 does. I have some shit to buy... I'll start another thread about it. Anyway! Oh and I'll try to use this chip to revive my black coma console.
- 23 replies
-
- 1
-
- installing
- xblast
- (and 4 more)
-
Hello I'm having an issue successfully flashing a split Tsop using the xblast lite modchip. I've albeit believe I've successfully soldered d0, a15 and A19 to the modchip. I can see the split in xblast os, I can boot either split but it currently has a 1mb cerbios 2.02 on there. I can boot either bank from the modchip. My issue is with tsop_m7, I flash this to the 256k bank of the modchip and proceed to boot with hexen inserted that boots off the other bios. I get no display and a solid green lights, eventually the Xbox power cycles back to xblast os. I've also tried setting the front switches to boot the 256k bank on power on same issue but it'll power cycle every minute or 2. I've tried setting xblast os to boot bank 2 with the power button. Same issue The option "force tsop recovery" has been set to both tsop banks - no change I've also tried tsop_m7 on the 512k xblast lite bank - same issue I'm stuck, not sure what to try next with the exception of shortening the a15 wire as I know I gave it too much ( approx 8 - 10 cm) but would rather not mess around with it if it's fine. Thanks for reading, any help is appreciated
-
Finally ready. Xblast modchips. Can do red, blue, or green. The look amazing!! Props to the designer @mi213 $35
-
I've got one of these Aladdin XT clones from Aliexpress and want to flash it with XBlast instead of using the openxenium for testing my boards I do ram upgrade on. From what I read some said that the SST49LF020A chip needs to be replaced with SST49LF080A. Anyone has more idea of how this is exactly done or is there a write up about this? I've attached a picture of the SST49LF020A that's on the Aladdin XT I got at the moment/
-
Hello everyone! I will tell you about my problem: I have an Xbox 1.0 with TSOP and 128Mb of RAM (I bought it pre-modified), I have tried to install an Aladdin Xblast by soldering the pinheaders to the LPC port and soldering point D0 of the motherboard to D0 of the chip (I have also tried soldering D0 from motherboard to ground on motherboard) and got FRAG. I have followed Barnito's Lpc Diagnostics (V0.1) guide (https://www.ogxbox.com/forums/index.php?/topic/239-lpc-diagnostics-v01/#comment-945) to verify voltages and continuity. With respect to continuity everything is correct except pin 2 and with respect to voltages everything is correct (+-10% of the correct voltage) except pin 1 0V and pin 5 1.7V. If I disconnect the D0 cable from the chip or ground, or if I disconnect the Aladdin chip, the console boots correctly with the Cerbios bios that I flashed in the TSOP and boots my Xbmc4gamers. What could be the problem? (if photos are necessary, I'll take them later when I get home from work)
-
Hello, hoping someone can help here. I've made several xblast aladdin chips, as well as the Jafar chips, and quickboot will never boot the designated bios i have selected in Xblast Settings. No matter what i do, it always boots to the Xblast OS. For example: i have quickboot set to yes, i have X25035 as my 512k Bank(0), IND5003 as bank(1), and Cromwell as bank (2) aka Xblast. If i assign either the 256k or the 512k bios to launch pressing the Eject button, it will work as it's supposed to.
-
I have 5 Aladdin XTs upgraded with 1MB SST49LF080As and reprogrammed to run XblastOS with 2 banks (1x 256KB, 1x 512KB.) $25 + shipping, Paypal goods and services I also have some v1.6 LPC rebuild boards if you'd like to buy them together. $28 + shipping for Aladdin + LPC board I'm in the USA and will ship internationally, just be aware of import duties and what to expect in your country. Send a message if you're interested.
-
Hey, I have installed the chip successfully and flashed the M8plus16 bios to the 256k slot but my DVD drive is toast and wont read my setup dvd (I tried tweaking the pot in stages all the way down to 500 ohms but nothing). I have installed and formatted a new harddrive within Xblast but is there a way to install a dashboard without a dvd drive? Is there a Bios with a built in FTP server for example? Thanks!
-
Mainly what the titel say's. I have an X-Charger 2.5 with Lattice LC4064V on it and I wonder if would be possible to switch the chip to XBlast OS.
Board Life Status
Board startup date: April 23, 2017 12:45:48