Search the Community
Showing results for tags 'x2.2'.
-
Hi all, I bought a "broken: for parts" Xbox. It was in good shape externally and when I opened it, it was a 1.1 and all five power caps were leaking. It did, however, have this X2.2 Pro modchip installed. I figured the problem was just the five leaking caps, so I replaced those with equivalents and assumed I had the problem solved. When I turned it on, I discovered it wouldn't move beyond the "Xecuter config live loading" screen. When I tried turning the chip off via the bank switch, the system would boot as far as the flubber animation before showing error 06. Long story short, I'm pretty sure the mobo is a write-off (clock cap was removed but I'm seeing a lot of old leak damage), so I pulled the chip off in hopes of installing it on a replacement motherboard. I'm not super familiar with Xecuter chips...is this chip salvageable? Do I have enough here to do a pin header install? I have a spare pin header, so that's not a problem. Based on my research, I know there was a second smaller cable that included the ground and D0 wires for that purpose, but I don't have it. (Of note, as you'll see, the bank switch is missing the blue dip switch cover, so I'd be ok doing a full 1mb BIOS flash and not using the switch bank.) Thank you in advance!
Board Life Status
Board startup date: April 23, 2017 12:45:48