Search the Community

Posted this on the FB page as well: Purchased a used box. Previous owner couldn't get it working so pulled the mod chip out. I can't seem to find the installation manual/wiring diagram for the chip. Checked archives, OGXBOX, reddit, Google, and nothing. It's an Xecuter 2.0 pro. No dip switch/lpt daughter board, but I was able to get the chip working. It has the 2 pin plug tagged to ground, and the other wire, which I am assuming goes to d0, but is also spliced into the controller 1 USB daughter board. It was pulled apart, but splicing it back together boots the chip. I did a couple x3's back in the day and recently did an OpenXenium. I have never had to splice into USB. I am assuming it's for power. But d0 needs to be grounded to boot the chip. Haven't tested with a meter yet, but I feel like it's sloppy and just not right. Hoping one of you fine people can help. Pulling it back apart today to pull the clock cap and clean it up, so I can post pics if needed. *Edit. Pulled apart and added pics. There are two splices, one to add length to the d0, and the one that is spliced to the USB is running to pin 13 (mode 3) on the AV socket and doesn't go to the chip at all. Some kind of trace repair? https://imgur.com/gallery/nASUVhI