Search the Community
Showing results for tags 'warped'.
Found 1 result
Warped heatsink bracket in v1.6?Hi all, I grabbed a v1.6 from a local seller and after confirming it worked fine, I opened it and gave it a good cleaning along with new MX-4 thermal paste on the CPU and GPU. I then soft-modded it and once UnleashX loaded, I saw the temps were floating around 65 degrees celsius. I figured ok, the pastes were fresh, those would go down. Long story short, they didn't. The system idles at 55 celsius and reaches 75 after gaming. Every other console I've owned/worked on hovers around 55 degrees under heavy load and drops back to 45 on idle. I opened it and took a closer look - the heatsink bracket seems to be warping away from the board. Where I've seen it sitting flush on other consoles, there is a good 2 mm gap under the GPU. I assume it means the heatsinks aren't as snug as they should be, causing the higher temps? The clips are still seated properly, but it looks like the heatsink bracket is pulling away. Is this a common issue? Should I just try to ignore it? Thanks all!
Board Life Status
Board startup date: April 23, 2017 12:45:48