Search the Community
Showing results for tags 'startech'.
-
I don't like that the Startech SATA-IDE adapter doesn't have a case, so I designed one for it, and thought I'd share it. It's printed in two halves and snaps together (if all goes well). sata-adapter-case.stl
- 30 replies
-
- 11
-
I have been using Startech Adaptors for nearly over 2 years in Xbox OG with no issues and Amazon are selling these at £18 roughly posted with a Amazon Prime Subscription. The best Deal i have found by far. One day delivery is not bad to be honest, anyone with other Suggestions or Alternative Options ??? Feel free to comment. Does and one have the STL files to Startech Adaptor The Original Version Design.
-
Recently acquired 3 Xboxes that I have tsop flashed with Cerbios. At first I purchased a cheap sata to IDE adapter and quickly found when I connected it I had no access to the DVD rom. I was also using the 40 wire IDE cable at the time so, I purchased an 80 wire IDE cable hoping it would solve the problem but unfortunately still no DVD rom access. I then purchased the startech adapter believing it would indeed fix the issue but alas, still no DVD rom access. With the startech adapter if I enable the option in the cerbios.ini file for DVD & HDD I get error 13 no mater which UDMA bios I flash and can't even boot into safe mode. So, doing this requires me to remove the drive and connect it to my pc to edit the ini file back to HDD & No DVD. Once I do this I can boot with up to UDMA mode 5 enabled. I was using old laptop sata drives until today when I got an SSD with the startech adapter but it still does the same thing. It also doesn't matter which position I move the jumper to on the adapter. Master and Cable select both do the same thing in all 3 Xboxes. Any ideas?
-
So my previous setup was using a cheapo sata/ide converter with a 80 wire cable, which actually worked pretty well, I haven't had any issues with it, but I decided to try the startech adapter too just to see if there was in fact a difference in loading times instead and I encounter a weird issue. I'm running IND 5003 bios and when I boot the xbox the flubber animation is very choppy and the audio doesn't sync up. It does load to the dashboard but the boot-up is pretty glitchy. I tried another ide cable and messed around with the pin settings with no avail. I could just disable the flubber animation but I'd like to try and get it running smoothly. Any help would be appreciated. Thanks!
Board Life Status
Board startup date: April 23, 2017 12:45:48