Search the Community
Showing results for tags 'settle'.
-
Hi, it's been awhile since I've touched my XBOX. Background Information: - It's either a 1.1 or a 1.2 - Gave it a thorough cleaning - I bridged the solder points and TSOP flashed it with no issues - Removed the time capacitor - It's connected to an OSSC via the Official Microsoft XBOX Component Cables - I have a second XBOX that's also either a 1.1 / 1.2 that I did all the aforementioned things to that plays just fine. - The XBOX was working fine for over a week Issue: - The XBOX turns on fine, and the Microsoft Introduction Plays - The screen flashes once (as does my other one) before it tries to boot the HDD - Usually right after the introduction, it used to load right into the Unleash X dashboard, but now the screen stays blank for a good 20-30 seconds before I see a very unstable image of Unleash X main menu go across the screen. - It seems like the XBOX cannot hold the picture steady and keeps changing resolutions. Things I tried: - Replaced the 3x 6.3v 3300 capacitors near the CPU as one was bulging - Used the official Microsoft XBOX Composite Cables that boots normally and the picture comes up fine I'm not sure if it's just old and other things are going on the board. All the other capacitors seem to be fine on the motherboard itself, although I haven't really looked at the PSU yet. I'm mostly new to this so I'm not sure what to look for in terms of the composite working but not the component since both cables work fine on the other XBOX. Thanks in advance.
Board Life Status
Board startup date: April 23, 2017 12:45:48