Search the Community

My LE Green Xbox which is very little used and has been kept in practically retail state (never opened) completely out of the blue decided to start itself the moment I turn on the main's power. Its been connected to the same power block as my most used Xboxes for years so when either are on it will have been getting some power to the clock cap but TBH I can't remember when it was last actually used; it has to be at least a month ago. Then this. It won't turn off using the Xbox power button but will turn off using the UnleashX menu option > Shutdown but then immediately powers up again. Its working perfectly otherwise. Clearly something has happened, probably partly due to the hot weather but what? My theory is that I made a big mistake keeping it plugged in so that when the other Xboxes were being used its clock cap was indeed being charged. Despite it not being used regularly that has led to its premature ageing and leaking, doing some sort of damage. I suspect I'll only know if that is correct by cracking open the case which I specifically did not and still do not want to do. So if the cause could be something else which doesn't required me to take its virginity advice would be appreciated.

Hello, Got a v1.1 Xbox today that i wanted to TSOP flash, but it has some issues, before doing anything the console was tested. The hard drive is making some loud whirring sound, but it manages to boot to dash, this will be replaced with a bigger drive. The DVD ROM was locked solid, so after opening the console and the DVD ROM, and giving it a good clean, that is now working again. But when i tested the DVD to see if it ejects, which it does, every eject press the console now appears to soft reboot, i mean it restarts but doesn't power cycle. Anyways i soldered the points on the mobo, and continued to flash which was successful, but the problem still remains with the eject. The console hadn't been opened before today, as far as i remember it didn't reboot on eject when i 1st turned it on to test and was trying to eject the tray. Have tried an alternate power/eject board but no change, also the console boots with no DVD drive connected also with no change, so i am out of ideas. Has anyone experienced this, or know of a fix ? any help is appreciated.