Search the Community
Showing results for tags 'model'.
-
Redherring32 (of OpenTendo fame) has been putting in some research into bypassing the need for a clock capacitor on the 1.6 revision Xbox; unlike the prior models a 1.6 will not boot without it. By removing R7P3 and R7P6 current limiting resistors which go to the positive leg of the clock cap and then connecting 3v3 standby voltage to that same leg, you can remove it entirely and still have a functioning system.
-
Got a 1.6 crystal in pretty great condition here with one serious problem - DVD drive (SDG-605) is dead, error 12. Tried swapping a known working DVD drive in and using exactly the same power+IDE cable+HDD it successfully boots to dash so it's definitely the SDG-605 causing the error. If anyone has any working DVD drives they are willing to part with, especially if they're in the UK, that would be great. Otherwise, it's going to be the eBay lottery, and I'm not feeling lucky.
-
I bought a couple used IDE Seagate 160GB ST3160215ACE drives for cloning and backup. I'm a bit disappointed though because despite them being the same model, one of them vibrates significantly more than the stock drive while the other vibrates like normal but has a longer boot to dashboard time. I tried swapping the IO chip that screws to the bottom of the drive with no difference. I also tried re-cloning with Chimp and it resulted the same way. With that second, slower boot drive, the first time I tried to clone with Chimp it showed something like "IO error" a few times and so I had to restart the Xbox and reseat everything and then Chimp went ahead and cloned with no errors. I wonder if maybe there are bad sectors that are slowing it down maybe? You'd think it might be something like the drive being set to 5400 RPM mode in its firmware (if that's even possible), but then why would it take longer to boot than the stock WD 8GB 5400 RPM drive? So I'm not sure if I should be fine or if there's anything I can do to solve this or maybe just get another new drive? I don't like the extra vibration on the first drive but I also want a fast bootup, because the second drive adds like 10 seconds.
Board Life Status
Board startup date: April 23, 2017 12:45:48