Search the Community
Showing results for tags 'making'.
-
Saw this on reddit : https://preview.redd.it/3qafajwfeo8c1.jpg?width=1170&format=pjpg&auto=webp&s=f140988a9e4d3dddf512bbb20af620959f38d46e Facebook post: https://www.facebook.com/100064048958829/posts/pfbid02hFrw7uakTP7huCYtJgQ8GxgKyQqKDVyikFsvyRggeL3uNxbvXx2MtBXBGj7LHy68l/?d=n&mibextid=qC1gEa I believe they want potential buyers to fill this survey : https://www.surveycake.com/s/KZeXW
-
I'm working on a mini Xbox and I'm going to be using a picoPSU for power. I've already read up on the 5v amperage issues and I bought one that should work fine. I've wired up all the ground, 12v, 5v, and 3.3v wires, and connected the Xbox's 3VSB, PowOK, and PowOn all to 3.3v. However, when I enable the ATX power supply and press the power button on the Xbox, I get green power LEDs for a couple seconds, then they blink green and red, and the console never powers on. Need a little guidance on what I should be changing in my setup.
-
Hi all I have a PAL mod chipped original Xbox with UnleashX dashboard and I'm using a component cable with NTSC enabled for 720P and they both work great together using component on my plasma TV but now I have an old CRT TV but the downside is it only has composite and scart so I would like to make a scart cable that plugs from my CRT TV that will have female RCA plugs on the other end so I can plug my component cable from the Xbox to this made scart cable, I would also use this scart cable to plug my PlayStation 2 into using a component cable. The question I have is because scart uses RGB do I simply wire the RGB red, green and blue from the scart "R,G,B input" to the corosponding red, green, blue of the component cable with the ground going to the ground pins of the RBG? And because the CRT TV I have upscales everything to 16:9 (it has no 4:3 capability) do I need to jumper pin 8 and 16 to make the switching mode to 16:9 as I run my Xbox at 720p with NTSC(U?) Will the jumper if needed at all for pin 8 to 16 need a resistor? Here's what I'm thinking for the male scart cable pinout: PIN of male scart: -to RCA 2 = Audio input R - to RCA Audio R 4 = Audio ground - to both RCA L&R 5 = Blue ground - to RCA blue ground 6 = Audio input L - to RCA audio L 7 = Blue - to RCA blue 8 = Status (16:9 linked to pin 16) 9 = Green ground - to RCA green ground 11 = Green - to RCA green 13 = Red ground - to RCA red ground 15 = Red - to RCA red 16 = RGB Status (linked to pin 8) the remaining pins are not used unless I missed something
-
i'm downloading a bunch of the oxm demo disks from archive.org. i remember that there is a certain program that i have to use to make those images ready for the hdd of my xbox but i don't remember what that program is. i'm also downloading a bunch of the oxm disk and i would like to be able to just set the program to ready all of them instead of having to do it one after the other, individually. can anyone tell me how to do this?
-
Hi everyone I've found that one of my old xbox is not working anymore when i try to boot it is making a weird sound and goes off, anyone know what could be the problem? maybe a power supply issue? The xbox should be a 1.1 with softmod not sure as was in a box for years I leave a video attached of the problem Thanks xbox_mpeg4_mpeg4.avi
Board Life Status
Board startup date: April 23, 2017 12:45:48