Search the Community
Showing results for tags 'lock'.
-
Hello I'm just in the process of dusting off my Green Halo edition OG xbox, that I modded years ago. Had a problem with the hdd, formatted it (with a release of slayers) and never got around to finishing the job. There it sat for 10? years and I am now in the process of sorting it out. I dont remember what chip I put in, but I do recall it has connectiopn to the power and eject buttons. When I press the power button, the dashboard comes up (cant remember which one), and when I press the eject button, I get a boot error screen... wall of text.... I remember that it will boot differently depending on which button you use, but I dont recall what it was. So, to get to the point, is there any reason I should lock the hdd? 120gb ide... Does the MS dashboard require it to be locked? I recall I had the p[rescense of mind to unlock the drive before I worked on it way back when, but dont recall why I locked it in the first place...
-
I’m attempting to fix a friends unmodded 1.0 Xbox with a dead HDD (error 7). I’ve successfully extracted the EEPROM using PiPROM and prepared a new IDE HDD with FATXplorer. However I’m having trouble locking the replacement Seagate ST3320620A IDE HDD which according the Xbox Hard Drive Compatibility Chart supports locking. Initially I used an IDE to USB adapter but XboxHDM23USB Beta 3 and 4 complained about an unknown USB chipset. I then tried a StarTech PATA2SATA3 IDE to SATA adapter which progressed a little further but still fails with “ATA SECURITY SETPASS failed: scsi error aborted command”. The output from XboxHDM23USB Beta 4 shows that the HDD is in the frozen state which I believe prevents unlocking/locking. If this is causing the failure, how can I unfreeze the HDD? Can I use some other utility such as hdparm to lock the HDD?
-
I recently obtained 3 xboxes, 2 version 1.0 that I originally modchipped at the same time with the same firmware and everything 18 years ago, and one that was "softmodded" but turns out to be a TSOPed version 1.3 according to guides or 1.2 according to OGXbox Installer disc display. I would like to TSOP the other 2 and get rid of the modchips. Each modchipped Xbox had a C:\backup folder with bios.bin, disk.bin, eeprom.bin, hddinfo.txt, and hddkey.bin files which I've backed up onto a PC. They both are using a Xenium modchip (no version on chip but it is white and uses a springloaded pogopin adapter) with Xenium OS 2.0.1. Xbox A - I was able to lock the HDD from the modchip menu, remove the modchip, and softmod. So it's ready for a TSOP. Xbox B - Attempting to lock the HDD from the modchip menu fails. I also tried locking the HDD from the EvolutionX V+3935 menu and it indicates it's locked. But removing the modchip and rebooting results in a "Your Xbox requires service" error with no additional error number in the upper left corner. If it helps, I also get the same error when attempting to launch the default MS Dashboard from the modchip menu, which I could do on Xbox A. When running the MS Dashboard from the EvolutionX Apps menu it loads fine. What is the best option to proceed from here to get Xbox B softmodded and ready for TSOP?
Board Life Status
Board startup date: April 23, 2017 12:45:48