Search the Community
Showing results for tags 'issue.'.
-
I'll do my best to describe the strange issue... I received a dead 1.6 xbox. Wouldn't power on. I changed all the bulging caps that were noticeably damaged. NOT all of them. (Maybe I should) Now the xbox powers on and works flawlessly, HOWEVER, when I power down the console. The console doesn't power back up. But, when I pull the power cord from the back and let it sit for a bit, it can power back on normally. I tried doing a google search and search this site with no luck. Help! Ideas?
- 15 replies
-
- 1.6
- motherboard
-
(and 2 more)
Tagged with:
-
I am repairing xbox 1.4 for a friend. His box is having power supply issue. There is not enough volt to run the hard drive. I used external 12v/ 5v source to power the hard drive and the system boots up fine. The dvd disk drive is also working fine as it is connected to the xbox power supply. I took the xbox power supply out and didn't notice any bad caps or bad solder joints. With everything connected and powered up ,except for the power to the hard drive I get the following voltage values. Orange = 3.3V, Blue = 3.3V, Brown =3.3V, Red = 4.48V, and Yellow = 10.5V. I tried adjust the pot and that is max i can get for red and yellow wires. Which caps do I need replace for these two voltages ? or is there something else i can check? Thanks.
Board Life Status
Board startup date: April 23, 2017 12:45:48