Search the Community
Showing results for tags 'installing'.
Found 19 results
-
Hi, I recently bought an Xbox, and I noticed that had EvolutionX installed. Being a very old softmod, I wanted to try to update it via the Disk Tools of Rocky5, but does not allow me to update, comes out a message that says ""Hacked Bios/Hardmodded mode" or similar, and nothing, do not make me update. I tried to ask for information on other forums, but more than answers have made me come further doubts and perplexity about the matter... I do not know anything with the scene modding xbox, I have always modified Nintendo consoles! Therefore, I apologize in advance if I improperly name terms or whatever. What do you advise me to do? With my ignorance I thought, through for example TrueHexen 2021, reset the system and then install the mod of Rocky5, but I do not know if this could brick the system. I just want to play my game backups and use Insignia’s online services! Thank you in advance for the support, and I apologize again for errors or inaccuracies, in doubt, I attach photos that could be useful.
-
I have a pair of soft modded xboxs I was getting ready for an event. I FTP'd some files over and they glitched out so when I went to test a game the xbox froze for an hour and when restarted I got error 7. All connections are strong so I assume I killed the drive somehow. I have no idea the eeprom or keys or anything like that. I then remembered I had an Aladdin X2 chip laying around. Can I save this xbox by simply installing the Aladdin chip? -
When I select manual mode in the artwork installer, select the required artwork, then the folder to install to (in my case F:/Games/'gamename'), the artwork always installs to the wrong game folder. As you can see from the examples below. If I install the artwork for 'Richard Burns Rally', it overwrites the 'Re-Volt' artwork. If I install the artwork for 'Run Like Hell', it installs to the 'Richard Burns Rally' folder. It seems to install to the game folder directly prior alphabetically. I've updated to the latest artwork installer and XBMC4Gamers. I've also tried installing artwork via XBMC4Gamers instead of the app, but it does this every time. Any ideas? -
Well, I built the encoder. L2 is a little crooked, but I'm lazy, so fuck it for now. I'm about to hook it up, so with me luck! @lopenator
-
After the 128mb installation, I get no sound. I tried testing everything and still no luck on sound. It plays all the games fine and no other issues. This is a v1.4 board. Let me know if you guys know anything I should look out for. I tried wiggling wires and pressing down on certain areas where the av is. I also tried reflowing the joint for the av port but still no luck. Any advice would be great. Thanks!
-
i just finished installing Aladdin XT Plus 2 on 1.0 now what to do next ? ps : i tested it and its working with evo x logo on left side
-
This is my worklog. I'll post pics and thoughts! Why am I sharing this? Because I can! Modding the other 1.4 halo console tonight with an XBlast Lite from Tomcat. I don't have to share such a routine procedure, but I feel like doing so. I should celebrate: I will finally start receiving the income I've been waiting for and I'll have all the time I want to learn new skills and get better at the things I've always wanted to learn. I will also be able to invest in consoles and get a little bit of everything and try to get some broad experience with all there is available. Oh and I bought a shitload of pinnheaders. I can mod like, 60 Xboxes now. I'm unsure of what to do for sure with this console. I don't know whether to keep the chip in, or just use it to flash the TSOP so I can sell the console. But it will have another 2tb origins drive in it, just like my X3 does. I have some shit to buy... I'll start another thread about it. Anyway! Oh and I'll try to use this chip to revive my black coma console.
- 23 replies
-
- 1
-
-
- installing
- xblast
- (and 4 more)
-
I'm using the latest XBMC for Gamers. After installing the Title Update from the DLC Section of JRocky5's downloader the game won't launch. Things i've already tried: Tried launching the game from other dashboards with no luck. Retransfered the game to the xbox hdd. Formatted cache, deleted every folder with the game id (4d53006e) inside TDATA and UDATA. Still the game boots onto a black screen. Reinstalled the MSDashboard, nothing changed. Anyone knows how can i completely remove the Update?
-
Got my first modded box, latest Rocky5 with UnleashX. Immediately I installed my DLC, which worked fine. I then decided I wanted to try the MS dash on it, tried just downloading the files online and running it (failed, error 16 but didn't cause any issues I could tell.) but then FTPed the Rocky5 extras and installed the dash this way. Then I dualbooted, but I chose 'No' on install UnleashX as second dash, and I didn't find an 'Alt Dashboard' folder. I uninstalled the dualboot and redid it with 'Yes'. Deleted UnleashX .xbe in the Alt folder and copied/renamed the MS dash into there. Dual boot works perfect. However, I popped in some games and all my DLC is nonfunctional. I noticed that in the MS dash memory manager, the DLC appears but the icons have a small green arrow in the corner. Normally this would be a checkmark. I was able to (without uninstalling the DLC) use the DLC installers again and fix all of my DLC. Green checks appear in MS dash now and all is well. I'm just curious if there is a chance somewhere along this line that I unsigned the DLC or something, or if this points to a larger issue that I will have again. I do not plan to do anything further but play games and rip CDs with this console, I just want peace of mind that this is not likely to break itself on its own again. If any of this is confusing, I can try to explain or show some pictures.
-
Hi guys! I'll get right into it: The question: Is there a way to properly/completely install dashboards via FTP (rather than via DVD-R)? (The secondary question: Is there a special dash/tool/step I'm missing to re-unlock the ability to rip games to the hard drive?) The chip: Xecuter 3CE The build: X3 Build 1959 The context: (Bear with me because it's been a long time since I originally setup this system, so I'm relearning a lot as I go.) I've had a v1.4 xbox hard modded for well over a decade that I would pull out occasionally. Unfortunately, I suspected the drive started going bad due to massive load times and freezing issues, and after a failed data recovery specialist attempt, I need to rebuild the drive from scratch. The up-side is that my Xecuter seems to still be going strong, and with the fresh drive I can boot into X3CL and FTP to the drive. I used the Disk Tools to reformat the drive and can see all the partitions in WinSCP. I recently downloaded the EvoX dash (build 3935) and transferred the .xbe file to my C drive. This let me "Reboot To Dash" successfully, but the dashboard did not have any options to copy/play games (which is the ultimate goal -- to restore my Halo 2 mods to their former glory), and the dashboard seemed to wreck my ability to FTP into the drive. (WinSCP couldn't get the directory listing, so nothing would show up. I finally got back into it by basically reformatting the drive a couple times using a temporary third drive to get me back into X3CL...but anyway...) As well, I also notice that there are many other files in my EvoX download (skins, trainers, etc.) that I am completely ignoring by copying just the .xbe file over. All over the internet (and this forum), I see recommendations to burn a custom ISO to a DVD-R and install from that, but I'd like to know if it's possible to complete this process properly via FTP. I'm sure there's more info I could be providing here, so please let me know if I left anything out. Any and all input is appreciated! Thank you!
-
Anyone got a good guide on installing LEDs or a cathode tube into an original Xbox? I guess i need to know some good 12v and ground points
-
Ok... first of all, I m sorry if this is a repeat, however I couldn't find a thread to help. Or at least it wasn't labelled under what I thought it might be. I have a TSOP xbox with IND-BIOS. It currently has XBMC installed. However, this XBMC doesnt run all the games that I am FTPing over to the console. Most games run fine, however there is an issue with some games. XIII doesnt run, DOA2 boots then hangs after the initial disclaimer. I am looking to install another dashboard type to load up these games and hopefully boot into them, but I havent been able to do so or find anything online. Does anyone know any 'how to for dummies' guides, or can help install another dashboard/application to allow me to boot the games that won't load? And which dashboard or applications would be best? Thanks in advance. Proto
-
Hi there I have a question how to install new themes to unleashx via FTP ?
-
How would one go about this? Just simply drag and drop and replace the files? I bought an Xbox with XBMC4Gamers installed. It boots up to XBMC4gamers and is on the latest version. Thanks!
-
Hi I have installed my Aladdin xt today. I didn't expect to run into any issues as seems simple enough and I can solder small things neatly as I'm used to modifying car ECUs. I think where I have an issue is the d0 wire, none of the guides actually show it connected not can I find an image online. The guide I've followed seems to say connect the d0 point on the board to ground. I have done this I think. Please see my picture and it causes my Xbox to not boot just flashes red light. Please can someone help me with where it needs to connect to
-
Hello guys, We just bought an old Xbox and when trying to install Rocky5 on it using Splinter Cell, we only get a black screen when loading the save. The front LED turned to red and nothing. The TV still says it has a 50Hz signal coming. The saves we used previously modded another Xbox successfully, is there something we're missing? Like a hardware revision limitation or rewriting the saves ? Thanks in advance bros.
-
I'm after a little help with this. Do you folks have a GOOD link to a Video on exactly how to install a 2TB drive reliably? I'm struggling to figure out the best reliable method on how to do this... Setting up partitions, with what apps etc.. I installed a 500GB IDE in my xbox but it's been nothing but trouble. so I obviously didnt do it the correct way Any help, advice, links or even better for the forum, a post with details, application downloads and images for a walk through. Thanks very much in advance!!
- 40 replies
-
- 1
-
-
- installing
- 2tb
- (and 2 more)
-
I need help with installing an lcd to smartxx i found a compatible one but can’t find a guide any where
-
I need help with installing an lcd to smartxx i found a compatible one but can’t find a guide any where
.thumb.png.f42da7287d0f269627e60f69c2f54ecc.png)
Board Life Status
Board startup date: April 23, 2017 12:45:48