Search the Community
Showing results for tags 'homemade'.
-
The Cheapmod Mini is a modchip in a small form-factor for the Original Xbox. Based off the Cheapmod schematics, the chip comprises of a single 49LF020 (256k) LPC flash to fit (1 x 256k) custom BIOS. Features: 256k LPC flash fitted for (1x256k) custom BIOS (e.g. Cerbios). Compatible with almost any Xbox revision - from 1.0 to 1.6b. Boot imports, backups and DVDs region free without any restrictions. Running unsigned code such as homebrew and multimedia players. Installation of a custom dashboard (e.g. UnleashX). Easy to upgrade the HDD (no HDD locking required). Very easy to install - just plug-and-play via pin header. Low-cost and affordable. Free and open-source. GitHub repository: https://github.com/m4x10187/cheapmod-mini
-
I made some homemade og xbox component cables using og xbox av cables and xbox 360 component cables. At first the homemade cables didn't work as I had read the diagram backward. Eventually it worked with what I assumed was fine colors until I took some comparison photos. Once going into xbmc, I noticed that colors were missing, specifically green and red. I've checked all the connections with a multimeter to make sure they go to the correct output. I also checked with a multimeter to make sure nothing was bridged. Everything appears "fine". https://drive.google.com/drive/folders/1p4oX9jJtl0ok6f0cWt4hHe7HL04pc1k8?usp=sharing That's some photos showing a comparison photo of my pound hdmi vs my homemade component cables and the connector itself for the component cables. Any advice on what could be happening would be appreciated. edit: Everything is ntsc, incase that's relevant information
Board Life Status
Board startup date: April 23, 2017 12:45:48