Search the Community

G'day mates ! (typical aussie speak i swear) I've had a bit of a break from the OGX scene however I am back now and picking up the peices after I did what I wanted to with some old projects. Thanks to @SS_Daveive got a $20 bargain 1.4 board working again (afte I butchered an LPC build) however I want to extract an old bios file I wrote a couple of years ago on my Duo x3 chip. Whats the best tool to estract it and then edit it to see what is in it so I can modify it for this new box. As I have a strong feeling the file I wrote was for a slimeline I made with a DVD delete, however It has some colours and settings I changed that I want to use for this new OGXBox. Cheers - Dan

I have an OG Xbox that no longer works, I've tried a different power supply and replaced some capacitors that were bad no luck, my friend gave me a working Xbox same model. Is it possible to swap the drive from my dead one to the "new" one and retain all the data? Also if I can't do that would it be possible to transfer the save data and games to the new system?

I recently acquired and old Xbox 1.1 with a a hard drive and disk drive both dead. It came with Aladdin XT2, so i switched the old hard drive to a new 80GB one and managed to install a new dashboard using an old computer disk drive i had laying around. Everything seemed to work fine and the console booted with Unleash X, but almost all games i tried installing on it's hard drive won't work. Dashboard tries to launch them, but the console simply resets to it's main dashboard. Not all games failed thought, 4x4 Evolution 2 and AMF Extreme Bowling started and worked fine without problems, but this is more of an exception than rule. It's weird, cause all emulators worked, and i was able to play Quake 1, 2 and 3 homebrew ports with no problems at all. Can someone please help me? Thank you!

Once in a while I do my routine check for XCM and Xecuter stuff on eBay. I did a check maybe a few weeks ago and there were consoles, chips and pro switches on there. Correct me if I'm wrong did everything just sell out or did eBay remove anything with "Xecuter" related to the name. Because eBay is a ghost town right now. There's just LEs on there and some scraps. Anyone get there listing removed? I know Nintendo cracked on the team so maybe other companies are following up. This would be dumb because eBay have been collecting fees on modded consoles for a long time, they would lose out on the market.

So when i got this console there were some games already on the drive and I could access and play them from the dashboard. Well when I updated to xbmc4gamers they were not being detected and i could not find their location on any partition. The available space on all the drives has not changed at all so it makes me feel like they are still there somewhere. I went into dvd2xbox and found all the games there and it said they were located in drive F. But in any file explorer srive F was empty. I tried to launch the titlea from dvd2xbox but keeps bringing me back to my dashboard. Any thoughts?

Hi. I am introducing myself in the forum. I am trying to bring to the life my xbox 1.6 with Tuscany power supply that looks dead, the xbox do not power on and doesn't do anything when try to power on. No measurement in the famous T2 transistor. There is no corrosion in my board and caps seems to be ok, so ... what is next to test? I would like to see the repairment guide but is not available for me at this point for newbie, so I ask you. Thank you all!

Hello OG Xbox forums, I've worked myself into a pickle again. The short version: I need to get a file off of an HDD that throws an error 16 (won't boot, Corrupted dash) but still works. Can I get it off using a second Xbox and a file manager, or do I need to buy an adapter and use Xpolorer 360 to get it off? The long Version: While preparing to TSOP flash my Xbox, I was copying saves over from the had drive onto a memory card for safe keeping. However when that didn't work with the UnleashX dash I tried to switch over to the default dash. This corrupted the files and now the Xbox throws an error 16 whenever it tries to boot from the HDD. Since it is an error 16 I can't boot from disc since the Xbox preforms the time check before it checks the DVD drive, and since the Xbox was only softmoded I can't just format a new drive and throw it in. From what I've found online I can use CHIMP and my working TSOP'd Xbox to recover the dash files on this second one, however I need the EEPROM.bin file. Can I get it off using a file manager that can detect both drives using the working TSOP'd Xbox, can CHIMP find the EPROM.bin file on the slave HDD and recover from that, or do I need to purchase an IDE adapter to connect my Drive to a PC via XPLORER 360 and then transfer it over to the XBOX? Thanks.

Just checking to see if there are any devs that would like to look into any of these games that have the source available. I know some have already been ported to xbox, however there are quite a few that would be interesting to see running. https://github.com/historicalsource?tab=repositories Here is the original thread where I came across it. Thanks to Anthony for bringing it up. https://www.dreamcast-talk.com/forum/viewtopic.php?f=5&t=14362&sid=6ed6fdb2d6b35f40b68765561d4d2f92

Hello all, I am new to xbox modding. I am just trying to learn more about the software side of modding this console. I have experience modding just about every other console and am now getting into the original xbox. I've installed an openxenium mod chip, and have ordered a 2TB hdd, ide to sata converter, and 80 wire ribbon cable. I'm just trying to get a feel for what the current methods people are using as a lot of information is outdated. Thanks for reading this.

Hello, I have an issue with 2 of my apps where if I reload them or try to load a game from them I get a black screen and nothing loads up after that. When I first start the apps they load fine. I have to reset the system to exit the apps to get back to the dashboard. I have changed directories, Installed both of them under F:\Applications and F:\Games. In both directories I get the same result. The Apps are: CoinOps8Lite and XBMC-EmuStation It is a hardmodded Xbox running Xecuter2 and the EvoX Dashboard. Is there something I have to change to get them to work? Thanks for the help!

Hi All, New member here, first post. I've had an OG Xbox for quite a while but sadly it was collecting dust until recently, it was cleaned up and I got the itch to play a few games. I think it has a modchip but that's up for debate, partly why I'm here and what my next post will be. Well hello from CT and hopefully I can contribute outside of just leeching some answers. Thanks Blastoid84

Hi all, I joined just over a year ago, and just realized I've never posted before. Thanks to this site and a few others, I TSOP-flashed a v1.0 XBOX and upgraded to a 2TB hard drive. Now I'm in the process of trying to streamline as many of my consoles as possible to use HDMI. Cheers, Cliff

Hi guys, So I was given an Xbox 1.0 from a friend that is chipped and has a 120gb HDD. Unfotunately the chip does not have support for HDD larger than 120gb and I am unable to flash the chip's BIOS (evox says it is not flash writeable). I'm basically in a bind to find a guide on how to softmod this box and tsop it from a modchip because I don't know what type of chip it is and how to disable it. Pictures below: Apologies for the very dusty MB, lol! As always any guidance will be highly appreciated.

Hey all. Sorry if this has been posted, but I searched and couldn't really find anything. I have a 1.0 Xbox that was handed to me by a friend. He said he couldn't remember much about it, but that him and his kid tried to mod it a long time ago, and now it isn't working. Upon opening it, I found a pin header, no modchip, tsop points soldered, and the underside D0 pad ripped off. When I try to start the xbox, it cycles power 3 times then frags out. I'm assuming this is due mainly to the ripped D0 trace. I've tried repairing the trace, and bridging the two pads connected by the green line, but I can't seem to get the solder to stick. Is there any other way to repair this, or is this the only way? Relatively new to xbox modding so any tips would be appreciated. Thank you!

DHCP, PC and Xbox are wired ethernet. All devices in the same room. Basically one day it was fine and the next it wasn't. Its so strange. When I ftp to any xbox from my PC, it maxes out around 1mb on FlashFXP. I have tried from Linux using a different client. Also tried 3 different windows clients. I changed out modems and ethernet NIC. If I setup an FTP from one xbox to another, the speeds between them are great/normal like 11mb. I can take files FROM the xboxs to my PC at the same speed. This is not simply just a 1 xbox issue if you cant tell. Any xbox I hook up, same shit happens. I tried 3 different dashboards. Tried different HDDs obv. The only thing I can think of is around the time this started happening, I did the forza multiple screen thing through DHCP. However my setup has completely changed since then, and new xboxs too. I am really lost on what this could be. I feel like i have covered every single base, but problem persists. This has happened to me in the past and 2 things fixed it. One time, I changed the ethernet cable. Tried that this time, didn't work. It specifically happened after a windows update way back so i reverted to an old version and that fixed it. However trying linux I feel has ruled that out. /shrug

First of all, thank you dear community for the oportunity to be a part of something good! I have a strange problem, have xbox 1.4 with aladdin XS MODCHIP, an older modchip ,but nonetheless it is working, As i want to upgrade to larger HDD, i pot-ed thomson drive, because it was failing, i put the 80 gb hdd, but i get error 13 and/or 16, the problem is that hexen or slayers cant read dvd from the first try,and always it can read from the second,third,etc.Also reads backups and reads hexen and slayers from retail HDD. Orange light is ok,evox sign is in the left-upper corner,it tries to read dvd hexen,but gets me to error 13 or 16 (this is only when i put blank HDD instead of the retail one)? DVD TRIES TO SPIN 2-3 TIMES, BUT NO BOOT TO HEXEN OR SLAYERS DISC,THEN ERRORS FOR MISSSING DASHBOARD Is there any solution to this?would appreciate very much,i could provide any information needed, THANKS IN ADVANCE

Hi all. I´m new here but not to the modding scene. Been modding consoles since the early days started around year 2000. Mostly Ps2 Wii Xbox Xbox360. Have been digging up the chipstorage and done about 20 consolles the last few months.

My Names Kaan, I am a modding enthuiast and have modded things from Xbox's to Ps3, Psp's, Wii's. Really enjoy doing it. Last night I successfully Tsop'd my first OG 1.1 Xbox, Flashed it with Xecutor 2 Bios using x2.5035.bin file with Xblast OS. Upgraded the Hardrive to a 2tb and am in the Process of transfering the Entire library excluding Sports and Maybe Disney games. Transfering Coinops and Ninja Massive ( not sure if both are really needed ) Wondering if there's anything thats a must I can stick on this thing apart from what i've mentioned. Maybe some useful tools?

Hi, was hoping you guys could help. When loading any event on the 'Eastern Bay' tracks in Burnout Revenge, I get a black screen error with text explaining the disc is damaged or dirty. Obviously I'm playing this from the HD, so no optical disc as such, but the error persists. I have tested this on a friends console and also tried downloading another copy of the game and ftping it over to rule out a bad install. No change. Is there some sort of patch for this game, or is it a noted issue? I cant see anything else about it. Both machines were 1.6 boxes with basic Aladdin chips and EvoX M8 bios. I also have here various 1.0, 1.4 and 1.6 xboxes with x3 chips, but i haven't tested this as yet as i don't currently suspect the bios? should i? Hope you can help, Cheers!

Hi peoples. I'm Jay! 35 from Southern Illlinois (15 minutes out of St. Louis, MO) and I have my original xbox 1.0 that I've had since December of 2001. 10 years ago, I softmodded it. Last Tuesday, I swapped the hard drive for a Samsung Spinpoint 160GB HDD, removed the clock capacitor then updated to Rocky5's softmod kit. Currently I'm attempting to obtain the things to see win98 lol. Just because. No real purpose except to just see it done! Take care and happy computing, folks!

Hello I'd like to make some 720p patches for my PAL games but I cannot copy files from Xbox to USB, I dont see operation copy in file managers (Xbmc, Dvd2copy etc.). In the other hand I can copy FROM Usb TO Xbox, any help, please?

i know the drive from a 360 will not work with an og xbox but are there any parts from a 360 drive that would work? for example, would certain lasers like the SOH-DX1 from a 360 drive work in an og xbox drive that has the same model laser?

I have an OpenXenium chip installed in my 1.6 box w/ 2TB Sata HDD; StarTech adapter; Chimeric custom 80 ide cable. I just finished installing the Xenium RGB mod by Nemesis. So I downloaded all of the Xenium OS LED and Skin files. Uploaded them to their own subdirs in a subdir named XeniumOS on E:\ so: E:\XeniumOS\Skins -and- E:\XeniumOS\LEDS when I select Choose LEDs... the only thing that shows up is <Default>, not the list of leds. I thought that was weird so I made sure E:\XeniumOS dir existed w/ sub dir LEDS, yep it does. Still stumped I thought well maybe the chip isn't reading from the HDD for some reason...so I opened Disk Tools from the OS menu and selected Format Partition and choose the Z partition. Selected Master selected Yes all the way through til I was REALLY sure....it said "Failed to format partition!" Did the same for Slave. So I confirmed it's not reading from the HDD...then I thought well i should FTP in and see if I can see the list of directories, they aren't there. I put my orig 8GB IDE HDD in w/ orig IDE cable and tried the same thing....it shows the LED files and Skin files. I'm stumped trying to figure this out. I've made sure the blue end of the IDE cable is connected to the HDD. Tried ALL of the jumper locations on the StarTech adapter; Master, Slave, CS and the other one. I have no idea, I gave up for the evening. FWIW, XBMC loads fine and I can see all of my files in the dash and FTP, games and apps load fine from the HDD...so It's a Xenium OS issue; it's probably related to another issue but I'm not sure what it is so I made this post asking for help. Can anyone offer a suggestion on how to get read access to my sata HDD in the Xenium OS? TIA!

Hey guys, finally blew the dust off my old v 1.0 hoping to have some fun and meeting new people.

ive downloaded all the games which is 2 terabyte (torrent on aracde punks) installed half of the games on E: and half on F: installed xbox artwork installer, however its scans all games from E: drive and F: drive. But the F: drive game covers wont show up. please help as is coming up with blank images