Search the Community

I don't like that the Startech SATA-IDE adapter doesn't have a case, so I designed one for it, and thought I'd share it. It's printed in two halves and snaps together (if all goes well). sata-adapter-case.stl

So as you may know i've already designed 2 different xbox mini cases and I'm also working on a full replacement case. This design sits in between these two, it loses the DVD rom and uses a 2.5" HDD/SSD instead of the full sized HDD. It also keeps the original PSU. The lid incorporates ducting to guide air over the heatsinks and also holds the HDD/SSD. Sttill a work in progress but heres a quick look so far:

As the title states, it’s time to get some updated tips on case modding. Im currently looking for newer/cleaner methods of reattaching jewels after clearing them. With all of the new products being available and unexpected uses for others, I’m extremely interested in hearing what you all do and how. I’ve shared a few of my methods here and there, so share some that you think are helpful. Share anything about LED mods, Painting, and so on.

Hi all, I built an xbox mini a few years ago and designed a case based loosely on ghostavels well known xbox mini. I had it laser cut from plexiglass and it turned out ok, but could be better. I'm looking into possibly designing in CAD and making the cases but want to see if there's enough interest for it to be a worthwhile venture. I've attached some pictures of my original, any feedback or suggestions would be great. Currently it uses the breakaway part of the controller cables for controller ports, I have only used 2 on mine but 2 more can be added obviously. I also added internal wifi hence an extra cutout on the back to loop a small cat5 to an internally mounted wifi pcb, this could be omitted or the wifi pcb could be directly soldered to the ethernet port (I wanted to retain the port). There is also a small window for internal IR dongle, again this can be omitted. The 3 smaller "holes" are for hdd act LED, Power LED and network activity. Again optional. You would need to do the pico psu mod and have some aftermarket cooling for cpu etc (I used Iceberq 4 pro's) Face plates could be any colour, same for the side/back pieces. Also doesn't have to have the xbmc logo engraved Thanks

So my plan is to design an aftermarket original xbox case that keeps all the original components (mainboard with heatsinks, controller ports, dvd rom, psu, hdd, etc) with the possible exception of the rear fan and metal shielding. To achieve this I have been 3d modelling all of the internals to ensure everything fits. I have some ideas on the style I want to go for but have some questions. 1. Should I include a place to mount an lcd/oled? 2. Would you want to keep the xbox jewel? 3. Hdd/lan activity leds? 4. Any other requests Once I have some feedback the most popular features will be integrated. For now here are some of the 3d modelled components (to scale)

I got recently an original black Xbox (the very classic so) but I would like to change the case for another one, like a reproduction of the Halo 2 Bell Ice Blue edition one. I know it would be not legit, but I just want to have one that look like this. It's just for fun and cosmetic for me. How to get one ? Should I try 3D Printing ? Or can I find some here or somewhere else ?

Hello everyone! Just joined and will be upfront that I do own a business around case modding and deal with the original Xbox as well! I just wanted to share for some of you who are considering case mods since that is much less common than some of the hard/soft mods. I made a 4 part series that teaches how to build and complete an entire case mod for the original Xbox console..from scratch! Hopefully this isn't seen as spammy or anything since I am technically a business, but I do try to make a lot of tutorials so people can learn how to cut window mods and install LED lights, etc. The four part series can be found on my website here (videos inside are also available on youtube) : http://www.tinker-mods.com/modding-tutorials/original-xbox-case-modding-tutorials.php

I wanted more of a subtle lighting mod for this halo console. I used the extra fan header to power 3 LEDs. Left side was easy to see. I also placed one in the middle to have a subtle glow from the front. The right side was tricky, because of the downward facing CPU air baffle on the underside of the HDD tray. So I put the LED on the very edge of the motherboard and pointed diagonally up and at the underside of the newly chromed HDD tray. Had to point it at an angle under that smaller opening in the bottom of the vane. That gave me the light output I wanted out the vent and the front bottom of the case is now (more) symmetrically lit. I am hesitant to show the wiring because I'm not too proud of it. As long as the light I want is there, who cares? And yes, I know there's overspray. Good thing nobody will ever see it. Lol. My controller port LED mods are getting much better and neater.

Does anyone have a link for an LED strip made for a modded Og xbox case? Saw a you tube video of one being made a few years back but it seems they are no longer available. The DVD cables were tapped to power the strip. Would like to find something similar. Any suggestions welcomed. Thanks

I'm an absolute cretin and have wanted to go for a paint job similar to the look of the official Mountaindew xbox but instead of neon green i'll have it as neon orange or something. What would you guys recommend?

Hi I'm just fixing up a cheap faulty xbox from ebay, it came with no screws, anyway the bottom Case won't fit the motherboard all the holes are 2mm 3mm off centre? Although it fits in the tin housing great. No idea what version M/B it is so help would be great. So far I cut 2 noggins off the bottom Case, still no joy lol. See photos below. https://www.dropbox.com/scl/fo/hlgzxwbzpzemvrd5j6zvv/h?dl=0&rlkey=yzsrj2j6jztmu42kj6mvczjd4

Hey guys take a look at this classic piece of case modding... Looks like it was either done by a kid or by a very impatient adult with the wrong tools!

So I want to build my ultimate XBOX, I already managed to get my hands on a 14.ghz 128 mb ram xbox (1.4 revision), planning to install stellar. But I also want to put it in a nice case. Luckily I can get my hands on a crystal xbox fairly cheap. But this is a 1.6 revision. I know there are issues putting a 1.6 in a 1.0-1.4 case with grounding, how about the other way around? And is there a fix for the grounding issue? Reason I’m asking is that I would probably put the 1.6 board in the 1.4 case to recoup some of my money. I briefly considered putting in a modchip, but sadly the marked for modded xbox in NL is rather slim. With chip, hdd, sata2ide connector and IDE cable I wouldn’t be able to recoup my money

1. Can the metal parts be separated from the housing without damaging the metal parts? and metal parts will not rust, but I want to clean the top case 2.With that said, what's a good technique for THIS case Crystal cleaning? 3.the casing is not yellow, but i want to clean it once and for all Anyone care to share their experience? p.s sorry, i don't speak english, just that is what google translate says

Anyone have a top and dvd bezel for a Halo Edition Console let me know. Need 1 to complete a set.

Hi, I'm currently try to install strip led lights in my OG crystal case, it need a 12v source. IV tryed the 12v direct from the power supply board and also from a hard drive power splitter. The problems I'm have is it keeps blowing MOSFETs on the motherboard? Is there a limit to how many LEDs can be installed? Thanks

I gave my friend a 1.4 crystal case I got in a bundle of Xboxes online, I forgot to tell him about needing to remove the metal shielding from a pin. Because of that, it would not boot or show any signs of power even when he put the board back in the old case. This case was completely empty so he did use the 1.6 power supply which is also important about not mixing them. There's this one particular transistor on the standby rail on the 1.6 motherboards that can fail. I have swapped this and it is working again

Xbox Original Modded Console. Custom Painted with Case Window and LEDs. Controller Custom Painted. RGB AV Cable. Power Cord. $160 USA Shipped Cashapp or PayPal goods and services.

Album: https://imgur.com/a/ptzp4Vl Saw this pop up for sale locally and made the trip to pick it up. He said his father-in-law was an IT contractor, and apparently he originally got the case empty. I got back home and opened it up to find the original case hardware kit sealed in its cardboard box, taped inside the drive bay next to a power cable in a bag. A silica gel pack was taped to the floor of the case. The IO connectors were zip tied together, tucked away in a corner. I am extra certain this case was never used, because the metal plate covering the DVD drive bay was not punched out. My assumption is that Microsoft ordered cases from a supplier (says Yeou Chih on the inside) and hand-assembled all 50 units themselves in Redmond. I'm guessing that this case was one that either arrived damaged, or just never got used. If there were rumored to be 50 units, then I suppose this is unit 51. The date code on the back is 4-18-01. I'm not entirely sure what to do with it. The inside is perfect, but the outside is a bit rough from kicking around in a basement. Ideally, I'd like to purchase the parts to remake the Alpha tower like N64 Freak did, but considering how difficult it is to find the Intel motherboard at a reasonable price I'm not sure how likely that is to happen. Maybe another 820 chipset board would work instead? I'm seeing a few similar candidates that are half the price of the Intel board. Another option I'm considering is building a similarly-specced PC inside and installing Windows 2000 for some Halo action. All I've done so far is clean it up. Thoughts?

I wanted to switch out the stock fan for a Noctua and still retain some of the OG look and feel, this is the result. Maybe it will be of use to someone else as well. The design is up on Thingiverse and PrusaPrinters, whichever you fancy. Print instructions are there as well. Enjoy. PS. I'm also working on a design that's more compact and easier to print (in two or three parts), I'll post it if I ever get around to completing it.

If even the slightest bit of pressure is placed on the case directly above the disc drive as it’s running, there’s a metallic “vibrating” noise. I actually had to loosen the screws on the case to stop it doing it all the time after reassembling it. I thought perhaps I’d tightened the two halves of the shell together too much. Also, is the read/boot time “normal” between inserting a disc and the black Xbox splash screen showing? Video here:

Hi I recently got a non working crystal xbox(1.6) for cheap, I already have a tsop 1.4 and was wondering if I can put all it's components(mobo,psu, dvd etc) into the crystal case.

Hello all. I recently installed one of those ‘quiet’ case fans (Nexus 70mm Real Silent case fan) with the expectation that I would get quiet performance with the same cooling. I was shocked that I had to drastically increase the fan speed to get the same cooling performance. So, now I want to rethink my choice and see if the somewhat noisy stock fan can be refurbished. Other then seeing advice to clean the blades, I don’t see any other suggestions. Before I tinker for myself, does anyone know if the stock fan can be disassembled, and lubricated with the hopes of getting the stock fan as quiet as it can be?

Looking for suggestions for Led lighting for a case mod. I would prefer not to solder anything. I would like to connect to an extra molex connector from recent hdd upgrade. Any suggestions welcomed. Thanks

https://youtu.be/SQiO5FDFtVY I built this a long time ago. Being an Xbox collector these days I've recently decided to give it a bit of love.