Search the Community
Showing results for tags 'blank'.
I've TSOP modded around 6 OG Xboxes. One of the last 2 I worked on, had no composite video output, though audio works and using my component cables worked too. I mod these and and refurbish to the best of my ability and surprisingly the few I've sold have done well and the people are very happy with them. The component on L4A1 is physically damaged on mine. Here's a photo for reference of what one looks like. This is not mine. I can get an actual photo of mine if necessary... Maybe I damaged mine when removing the mobo to clean everything and solder the TSOP joints? who knows. It's damaged. It looks like the top is sheared right off and still hanging there attached off to the side. I'm guessing this is the culprit of my lack of composite. I wouldn't want to sell one with composite cables that doesn't do composite output... I think I should fix this and include the stock cables and they can decide if they want to use an HDMI adapter or not. My question is, where can I buy this component? I found a few threads here discussing it, but never where to get one. Do I need to steal it from a parts console? Secondly, if I do NOT fix this and sell it including an HDMI adapter, will that work just like my component cables are working? For reference, here are some threads discussing this component.
Hey guy, I've been having an on going issue with my xbox's lcd screen. I've had the screen installed for atleast 6 months and im happy with it. But it seems it constantly blanks out mid game and sometimes will come back after a few minutes, there is a few times where the screen will actually dim(more than what I have it set to) then blank out shortly after. I've also notice after booting if I go into settings and switch it on and off it will not go blank. I've gone through the lcd.mxl and revamped it to removed most scrolling texts or any character that isn't supposed by the 2004a lcd, reflowed my solder, reprogramer my arduino, reflashed my openxenium but still no luck. It also does the exact same thing in xbmc4gamers. Any help would be great. Xbmc4xbox Origins skin + ui update Openxenium Spi2par backpack + smbus wires 1.0 xbox
Hi, so I've used this guide to install an Aladdin XT PLUS2 into my rev 1.4 Xbox. I soldered D0 to the chip and bridged BT so the chip is always on, but as soon as I power up the system, the screen stays black. If I unplug the chip it normally boots. At first I followed the guide and soldered D0 to the LAN LED's ground, but then the Xbox would just boot normally without the EvoX logo, after I soldered D0 to the chip, the black screen problem appeared. (FYI I took the pictures when I still had D0 soldered to the LAN LED's ground. Oh and Ignore the 4 pins at the top, I was too fast and placed the pin header wrong, so I had to solder on 3 other pins) I already checked the solder points three times and tried to reflow the solder points two times in hopes that I just messed up soldering the pins, but that didn't help either. Can somebody tell me what the cause for this to happen could be? The system doesn't FRAG, HDD spins up, but the TV just stays black.
Board Life Status
Board startup date: April 23, 2017 12:45:48