Search the Community

I coulda sworn I heard about this in some thread that I can not locate. But I thought that there was a way to 3Dprint a bank select button for the X3CP. Is this true? Cuz I'm missing one. I want to buy one more X3 box plain and I have a CP for it. It's just missing a button. Any guidance you guys can offer?

Remembering back to when I purchased my first Xecuter 3 mod chip, I was annoyed to discover the bank switch did not come with it. Payed the price for getting a used one, or at least making sure it came with everything. I looked all over to see if someone could help me jumper connections so I could use the different banks available to no avail. Finally I bought one new, which is not a choice nowadays. So I am dissecting switches and making schematics for each, starting with the most popular Xecuter 3. I have already mapped out the Xecuter 2.2 Pro and Xecuter 2.3b and will make a .jpg for them as well. Not being familiar with the programs used to edit pictures and make these, it took me 3 times as long to make this one schematic than it took me to test and map it out. I'm saying this in hopes I won't get flamed for poor work, I just want to help. Let me know what you think.

Hi. Found my old v1.1 Xbox which I modded 20years ago with an Xecutor 2.3 Lite (see pics). Wanted to get it going again now that Insignia is running, so before even powering on, I've removed the clock cap and replaced the 5 CPU caps which were leaking. Powered on today, and it starts in microsoft dash. Hooray! Soldering successful, but no X2 bios. The 'X2 Lite Ext' board with the 3 switches on doesn't seem to work (switches are bad - checked with meter). Also the 5 black wires leading to the Ext board were frail and snapped off from the connector while testing . Luckily I caught it and labelled each so I know which wire does what. Question is, what to do? I doubt I can find another X2 Lite Ext switch board and cable. Does anyone know if any other switch bank works with my chip? I could just bridge the wires to force modchip enable and bank 1, or try to build my own new switch bank. Any suggestions if you've done this before? Thanks

I'm looking for a replacement sticker for the X3 BIOS bank selection switch or a replacement switch if anyone has one spare in the UK? I am also looking for an Xecuter XLCD kit to complete my X3 install (this isn't a huge loss if I can't buy one and I don't mind going down the DIY route for this if nobody has one they want to sell - I've had some great advice from the XBOX-SCENE guys regarding what parts to buy). Please let me know if you can help. Thanks.

Hi, I managed to snipe an Xecuter 3 for about $100 and an LCD for it, but I'm missing the Bios bank that they usually come with. Is there a way to make a custom bank as an alternative or are there any dip switch banks that can imitate the same thing? Thanks!

hello, i received recently the xblast chip, was intended to use it mainly for ram upgrade but i have a xbox with tsop bad flash. so the xblast has ind bios on bank 512 and x2 on bank 256, i flashed via menu the bank 256 with c:\tsop_m7.bin, went ok. but when i load it from xblast os with a hexen dvd in drive, screen freeze at logo like no dvd was read... tested with samsung and thomson drive. what's going on ? thanks

Is there any way to see what bios are flashed without going through all of the switch combos?

EDIT: Never mind the chip wire on the bank came loss . lol All sorted

Sorry if this has been posted before but I needed to know so I thought I'd post here too. 256k Bank Bank 1: on on on on Bank 2: off on on on Bank 3: on off on on Bank 4: off off on on Bank 5: on on off on Bank 6: off on off on Bank 7: on off off on Bank 8: off off off on 512k Bank Bank 12: on on on off Bank 34: off on on off Bank 56: on off on off Bank 78: off off on off 1MB Bank Bank 1234: on on off offBank 5678: off on off off 2MB Bank Bank 12345678: off off off off