Search the Community

I haven't really been able to find a ton of info on the communicator, I am curious about it though. It would be nice to have a way to hook up the Xbox to a modern gaming headset, through a combination of Toslink and an AUX jack maybe, ideally without having it plugged into the controller you're using. I'm assuming this is an analog/digital converter and that a simple AUX to USB adapter couldn't replace this thing.

I cant see anything in the file explorer and FTP doesn't work either. I tried to load a Bios from a usb but it file explorer is still empty.

Hi I've got another dead xbox the mobo is corroded by the clock cap. The previous owner tried to repair but components flaked off. I'm hoping I can add the missing components and get it working again with some help here. It's bad. It looks like 5 SMD transistors and 5 resistor or diodes are missing. serial and gfx chip (focus) suggest board is v1.4 according to https://www.informit.com/articles/article.aspx?p=367210&seqNum=2 The same area on v1.6 is very different so it would be a big help if anyone can photo the components on a v1.0 to 1.4 board thanks

Greetings Everyone, I'm about to install an Xecuter 3CE into a 1.6 Xbox. Does anyone know or have an opinion on whether or not I should cut the LFRAME trace? Thanks, RogueOgre

So I received this in the post today, to me it looks like a re-design of the Aladding XT. 1mb chip with X2 512k bios, xblas & IND 256k bios each. I've seen several posts and links here before to other forums about re-programming the IC on Aladding XT but no exact step by step guide. And recently someone else did it on discord and I reaced out to them but they never shared how they did it. I got a faulty Aladding XT which was working fine and had the chip on it flashed with Xblast bios for testing while doing ram upgrades until one day it went bad after an attempt and since then it just frags whenever its installed on any board. I know its not the ST chip as I re-programmed it and tried different ones but it just does the same which could only mean the IC gone bad or curruept on it. I've got several devices that could program the xsv files format like NAND-X, Glitch360 Spi & Matrix NAND programmer. anyone used or has idea how any of these can be used to program the IC on Aladdin XT or read the IC on this new Jafar chip?

No bugs in here, just questions.

I’m attempting to fix a friends unmodded 1.0 Xbox with a dead HDD (error 7). I’ve successfully extracted the EEPROM using PiPROM and prepared a new IDE HDD with FATXplorer. However I’m having trouble locking the replacement Seagate ST3320620A IDE HDD which according the Xbox Hard Drive Compatibility Chart supports locking. Initially I used an IDE to USB adapter but XboxHDM23USB Beta 3 and 4 complained about an unknown USB chipset. I then tried a StarTech PATA2SATA3 IDE to SATA adapter which progressed a little further but still fails with “ATA SECURITY SETPASS failed: scsi error aborted command”. The output from XboxHDM23USB Beta 4 shows that the HDD is in the frozen state which I believe prevents unlocking/locking. If this is causing the failure, how can I unfreeze the HDD? Can I use some other utility such as hdparm to lock the HDD?

I mean, played FIFA and it's like... ultra-complex campaign mode... very limited number of national teams (lots of useless clubs)... NO EDITOR (really? that's the funniest part, to build your own team!)... complex commands (some sort of mix between PES and older FIFA titles... switching player makes my mind stun...)... isn't there something really simple like older ISS games or even Virtua Striker series? Asking here instead of usual "top 10 soccer games" pages because those pages only talk about PES and FIFA. Of course, I'm not looking for excellent games... even "decent" are ok to me.

Hi new to all this , managed to softmod and tsop flash my1.0 xbox and i have a IDE from a old xbox. I have been trying to use that but wheni put it in and try boot hexen it wont boot and just goes into the call support screen. I have made sure jumpers are the same but it wont boot into hexen. Could someone maybe point out what i am missing ? I have tried the hexen disc in before and it works fine and in my other xbox and it works fine.

Building a few OX and OGX360s any pointers? Do’s/don’t s? I already have everything minus the j1 conn on the OpenXenium thanks

Shoot offers tested and working selling as bundle xenium ice chip along with xenium sp ice solderless adapter.

Trying to rescue a 1.6 box. The unit booted to microsoft dash but dvd rom drive has failed, tried cleaning and pot adjustment, no luck. Next obvious option was installing a modchip.Installed an Aladdin XT plus I had working in another 1.6 as was already flashed. On boot I get the unit cycle on and off until the third attempt where it flashes Green and red really fast. I removed the lpc wiring and modchip, even pinheader, checked for damage, the header is perfect and the xbox boots normally. I have never had an issue like this before. Do I just keep trying to install again or am i missing something. Does the 3 boot attempts mean something? I am unsure to the sequence of events from pressing the power button. Any pointers, help would be appreciated. Just dont want to throw it out. Update, the green / red fragging is not modchip related and happens intermittently when running the box without a modchip. Progressively worse the more boot resets.

Hello everybody. I am just returning to the original xbox ecosystem after quite a long hiatus. I originally joined and frequented Xbox-scene (with the same username I've chosen here) back in 03/04 and eventually fell off somewhere in the early days of the Xbox 360 and sometime before the site disappeared. Recently, I've been seeing a lot of videos on Youtube about people sort of bringing these old systems back into the spotlight, and decided it was time to pull mine out of storage and show them some long overdue love. I started with a v1.2 that I soon TSOP flashed with the Splinter Cell buffer overrun exploit, but soon caught the itch, promptly installed an Xecuter 2.3b lite and began diving in to all of the cool case mods including the clear LED backlit case jewels, a DVD drive window cut and LCD installs that were so popular at the time. After a while I reverted back to plain cases and less flashiness, and fast forward to today, I still have two v1.2s, one in an original case still rocking the X2.3b lite, and another TSOP flashed, in a green Halo style case. I really wish I still had all of my old pictures from those days of the mods I performed. I would love to look over them once again, and re-examine how well or poor of a job I had done as a young tool-inexperienced teenager lmao. So many memories of good days gone by. As for what's next, I've ordered a couple capacitor kits to refit both boards, as I'd like to keep them around another 20 years if possible. I also ordered a set of ram chips to do the 128mb RAM upgrade I always wanted to do back then, but was nowhere near handy enough with soldering, nor had the proper tools to do it. From there, we'll see. I'd be lying if I said I wasn't keen to get back into case modding, bringing with me a couple more decades worth well-needed know-how. Anyway, it's nice to be back. I don't have near as much free time these days, to stay eyes glued to the forums as I did back then, but I hope to stick around and maybe try to relive the magic once more!

I have an Xbox with a 2.6 but it’s missing the bank dip switch board and cable. Does anyone have one for sale?

Hello everyone. I just finished TSOPing an Xbox model 1.1 and decided I wanted to flash Cerbios 2.01 Retail, and after flashing I have a red/green flashing light with no picture. The system is hooked up via composite (yellow, red and white) video cables and now I have no picture. I cannot access FTP, either. I was also sure to FTP over the Cerbios.ini and boot animations to the root of C ahead of flashing. Can anyone help or point me in the right direction? Thank you.

I made some homemade og xbox component cables using og xbox av cables and xbox 360 component cables. At first the homemade cables didn't work as I had read the diagram backward. Eventually it worked with what I assumed was fine colors until I took some comparison photos. Once going into xbmc, I noticed that colors were missing, specifically green and red. I've checked all the connections with a multimeter to make sure they go to the correct output. I also checked with a multimeter to make sure nothing was bridged. Everything appears "fine". https://drive.google.com/drive/folders/1p4oX9jJtl0ok6f0cWt4hHe7HL04pc1k8?usp=sharing That's some photos showing a comparison photo of my pound hdmi vs my homemade component cables and the connector itself for the component cables. Any advice on what could be happening would be appreciated. edit: Everything is ntsc, incase that's relevant information

Xbox original controller modded communicator shell with power button and USB port.... This requires modifications to be done to the console for this to function with the power button. USB port works as is. make sure you Google what this is before you ask me any questions. $20 USA Shipped. Cash App or PayPal goods and services only

Xbox Original Modded Console. Custom Painted with Case Window and LEDs. Controller Custom Painted. RGB AV Cable. Power Cord. $160 USA Shipped Cashapp or PayPal goods and services.

Hello, new member on this forum for a day, Xbox original French Fan for a long time, i'm was looking for help try to resurect one of my xbox, and thanks to this forum i did it, reading a lot of ya Thread help me to win my 3 days battle against that console. thanks to all the members . i've subscribe right after, because you are a source of treasure for this console now it's time to feed the beast . cheers all

A service installed an Aladdin xt modchip into my xbox, works perfectly, the problem I have is that if I press the power button it drops me into the official MS dash, if I hold the power button for 1 sec it takes me to the Slayers custom dash, so I can play anything. I wanted the modchip to be permanently enabled so I dont have to hold every time the power button, so I soldered two joints as shown here: This causes my xbox to turn on as soon as I plug it into the wall, even without pressing the power button, and the xbox can't be turned off. Is it a normal thing? I mean this automatic power on obviously not normal, but that one that I have to hold the power button to enter custom dash, is it normal? Or the service messed up the soldering points with the modchip on the motherboard? I have a 1.6 motherboard I guess.

This is a long shot since I can't seem to find anything on the subject anywhere. Does anyone know how (website, guide, person, video) to install both the remote dongle and the logitech dongle internally? I remember a long time ago a guide or two on how to do it but can't seem to find anything now. I'm guessing that there's a lag issue for the logitech and maybe there's better newer tech now that corrects that, if lag is a big issue I might just get something newer even if its not internal but the remote dongle to turn the xbox on is a must. Is the lag that bad on the logitech, enough to go back to wired? What do you guys recommend is the best wireless solution with current tech? I would still like to know how to do the mods, hope someone out there knows. Thanks in advance.

My family absolutely adores our original xbox. It was modded back in the day with an Xecuter v2.6 chip with is connected to the debug pins, and a few other misc spots. I didn't get to the clock chip in time, and corrosion ate through the tiny edge traces under the board. I've tried repairing it, but it's beyond me... once it warms up, it goes crazy on/off eject/close... I have another 1.0 motherboard and figured I could use that as a replacement, then cross the HDD Key when I got there. So I followed the pinout of the original motherboard and replicated its connections, installed the new motherboard in the original's case and sure enough, Code 6... So I softmodded the new mobo with its original HDD with the Rocky setup and null'd the hard drive. I swapped the HDD back to my original and still no good... I've read that hard-modded xboxes are capable of working better with non-locking HDDs, so I'm hoping there's something I can do to get this new motherboard communicating with my original hard drive. I really would like to keep the content that we have on there. Is there any hope? Thanks in advance!

Can I swap a cable from an official S controller and a Duke. I can solder so was thinking I could open my Duke as the lead is snagged - still working perfectly. I was planning on cutting the wire just inside both controllers and then soldering the non frayed wires from the 'S' to the Duke. Has anyone tried this? Should I just leave well enough alone? Thanks

I'm about to install some Internal mods and needed to know how to power them, do I just tap into the hdd's molex? I'm not using the DVD drive so I was thinking of using the 12pin header but I don't know what is a safe amp limit. The mods would draw around 2.5A, how do you guys safely power multiple Internal mods like leds, temp sensors+display, wireless controller & remote control, wifi, Extra fans?

Folks, thanks for letting me tap the vast knowledge here, yet again. I have 3 issues and hope to get at least one figured out, thanks for any help you can give. I didn't have much luck in the search, so I'm sorry if this is a repeat topic, but I'm sure KaosEngineer will prove me wrong yet again #1 Video playback lags in both XBMC and XBMC4XBOX on 2 different V1.6 softmod boxes. I've tried several formats, .avi, .mp4, .m4v, etc., they all open and play, but either have bad/scrambled video, slowed down playback but audio remains normal, and things just don't run like they should (or as I would expect). In XMBC4XBOX, for example, I've tried all the "video" settings I can see, such as pixel shredder, flicker filter, skip loop filter, etc. The same files work fine on my desktop and laptop, nothing wrong with the files I'm trying to watch. -Am I using a bad program, is there a better video player? I'm considering, naively, upgrading to a SSD.... #2 Is there a plain, straight forward tut for video output upgrade, like switching to HDMI or improving from the 480 (or whatever the standard video output is) with a softmod? #3 Far less pressing, on a recent softmod of a v1.6, I get an MS error 07 when I use the restart/reboot action from the dashboard and other apps that offer a restart. It only happens on restarts, I can turn the unit off then on, and NOT get the error, so as of now it's just a minor inconvenience, but makes me wonder why it occurs. New 80pin IDE cable, used in both directions (blue end on mobo and black on hhd, as well as the reverse) and sure to plug them in tightly and completely. Using a 1tb seagate that is listed on the compatibility chart as working. here's the sata-ide adapter I'm using https://www.ebay.com/itm/154372204735 Thanks for the help!