Search the Community
Showing results for tags 'alladin'.
-
Hello everyone, I'd like some help repairing my Xbox. I got an Alladin chip but while soldering I ripped the ground pad, now my Xbox won't boot to a dashboard with or without the chip. The behavior is at follows: Boots up flickering 3 times and reboots 2 times, the third time it boots either to XBlast or flickers red and green if booting to a flashed BIOS or without the chip. I've checked the dashboards, and the C drive has a lot of them for most BIOS options and so is the E drive so there should be no issue. I don't have the best tools for precise jobs, and this is my first soldering work. I have flux and it's old, dark colored and leaves quite a bit of residue as seen on the 4th picture, unsure if that's an issue though. What can I do here? Do I cut the hanging trace and connect to ground elsewhere or solder both trace ends to the pad again, etc And would the copper wire, as seen in the last picture, be enough for connecting the D0 to ground? I don't have 30ga or any type of wire as shown in videos and guides. Thanks
-
Heyy guys, Im playing around with some xboxes and some friends are trying to mod their xboxes too now... My friend has an xbox 1.6 from the Dutch navy He tried to softmod it, but it failed somehow... He turned it off/on and now Error 16 appears.... Can this xbox be fixed by installing a modchip?
-
Hello. 1- I installed for the first time an Alladin xt Plus2. When I just plug my Xbox with the Power cable the red light on the chip immediately turns on. Shouldn't turn only when I turn on the Xbox? I am afraid I did smth wrong. The chip works fine anyways. It appears the EVOX logo. 2- Is it normal xbox heats up more than the usual before I installed the chip? The heat sink kinda burns after the chip installation. I changed for a new 250gb hdd. Is that the reason for the heat problem? Should I change the cable for an 80 pins to don't heat up a lot? Thanks.
-
Hi all, Feeling pretty embarrassed. I have a PAL 1.4 XBOX with what I think is an Alladin Advance v32 installed. I was having issues with PAL games and the HD modes. I used XBMP to change the video output setting to NTSC-J. The console loads into the chip black and white (with shades of brown). Part way through the boot, the lights change back over to stock bios (bright green eject light). The console then displays Error 21. I cannot load back into EvoX to change the video setting back. No discs load. Is there anything I can do to change the video setting? All help is good help.
-
Limited Edition Mountain Dew Xbox [1 of 5000] Never been opened or modded. 100% unmolested. Stickers still intact. Overall in great condition. Includes 1 power cable and one A/V Cable. Located in New Hampshire . Asking: $229.99 + Shipping to the lower 48. Will ship to Canada and Europe just message me.
Board Life Status
Board startup date: April 23, 2017 12:45:48