Search the Community
Showing results for tags '2.7'.
-
Hi all, I've recently bought this adapter , I connected it to the power and the data cables (Seagate SATA 250gb drive 3.5"), inserted Slayer Evox 2.7 DVD, but it stucks a bit into the Xbox splash screen (while showing the pink icon on the top-left, no "Slayer Evox 2.7" appears below the Xbox logo) before giving me Error 16. So I switched back to the old PATA drive, Evox launched correctly, switched the drives (while Evox still running) but : - when I format, it takes ages and returns '0' on each partition - when I try to lock/unlock it freezes (blank text on blue container) - when I try install as new large hdd it takes to formatting - when I try to install just Evox on C it takes weirdly no time (after formatting all partitions took ages as usual). Edit: I just tried, left the console for a while, then returned and as before all partitions shown '0' and when I reboot (thinking the install process was complete) same Error 16 as before, sometimes error 7 So what I'm supposed to do? FYI: the adapter has no "slave/master" thing on it, just the 40 pins and the power ones (but it seems making the hard drive working/sounding).
-
So I got Slayer 2.7 properly running on a DVD-R, but I don't know where to start from . I know some options can ruin the HDD or the XBox so I would need to know what is the correct installation procedure. I have a 120Gb HDD (a compatible Maxtor, according to this list Xbox Hard Drive Compatibility Chart ) that is connected instead of the previous one (that works fine with Evox already running), but I literally don't know what to do once the functions list of the installer appears on screen. For example, I don't know about Kernel compatibility, if the HDD is to be considered as RETAIL or UPGRADE/BIG HD, etc. I'm not completely sure, but I think my consolle is Hard Modded, because I've read somewhere that if the seals have holes around the screws or if the screen flickers a bit then it means it's a hard mode, but again I'm not sure. I don't really want to touch the internal part of the console more than the necessary to check it out (I've been told the modchip is visible somewhere), honestly. Any suggestion from somebody who already installed it?
Board Life Status
Board startup date: April 23, 2017 12:45:48