Search the Community

Hi. Found my old v1.1 Xbox which I modded 20years ago with an Xecutor 2.3 Lite (see pics). Wanted to get it going again now that Insignia is running, so before even powering on, I've removed the clock cap and replaced the 5 CPU caps which were leaking. Powered on today, and it starts in microsoft dash. Hooray! Soldering successful, but no X2 bios. The 'X2 Lite Ext' board with the 3 switches on doesn't seem to work (switches are bad - checked with meter). Also the 5 black wires leading to the Ext board were frail and snapped off from the connector while testing . Luckily I caught it and labelled each so I know which wire does what. Question is, what to do? I doubt I can find another X2 Lite Ext switch board and cable. Does anyone know if any other switch bank works with my chip? I could just bridge the wires to force modchip enable and bank 1, or try to build my own new switch bank. Any suggestions if you've done this before? Thanks

I have an Xecuter 2.3 Lite modchip, of which the external switch board has long been lost. How would I go about purchasing a replacement, or at least a compatible ext. board?

I got an xbox v1.0 motherboard with an xecuter 2.3 pro modchip that was not working. I took it apart and found the d0 wire was loose, so I resoldered that connection and hooked everything up and the system ran fine for about 4 hours, at which point I powered everything down and went to bed. this morning I go to power on the unit and the blue lights on the modchip light up and the fans spin for a second, but no lights on the front panel and nothing else happens. the capacitors on the power supply and near the psu connector on the motherboard all look fine. not sure what else to check, so any help would be appreciated. Also, the clock cap was removed before I got the xbox, presumably when the modchip was originally installed VID_20220223_031845379.3gp

I have 2 original XBOXes, one is v1.6 and I'll eventually add a modchip, and the other is a v1.2/v1.3. I finally got around to fix the corroded traces problem on the v1.2/v.13 by soldering 4 wires from a 80pin IDE cable, it looks much cleaner than using 4 stranded wires I added a used 1TB sATA HDD + IDE to sATA adapter + 80pin IDE cable and used Hexen 2018 or TruHexen 2021 (not sure which) which installed fine. BUT... I know the laser will eventually die and I want to have an alternative method of setting up an HDD, so I picked up a 2nd 1TB HDD and tried XBOX HD Maker 2.3 USB beta3, with the batch file modified to make it work with any connected HDD, not only USB. The steps I did were: - ran xboxhd.bat, option 2 (Launch xboxhdm), then within QEMU, option 1 (Build a new Xbox HD from scratch) - did NOT format partitions because it outputs "Error: out of memory" when formatting F: and then scrambles the entire output and menu, instead I went with option 3 (Format extended partitions on Xbox drive) + 4 (F and G splits space evenly), then 2 (Rebuild C-partition on existing Xbox-drive). When booting the XBOX with this HDD I get a blinking orange light and nothing on screen after the initial boot logo. If I use Hexen to install a Dashboard it works fine, so I know the HDD is correctly partitioned and formatted. The batch installs some files on the C drive, maybe these files are not the correct ones for a TSOPed XBOX?