Search the Community
Showing results for tags '2.0'.
Found 5 results
-
I started working on another one and it has an Xecuter 2.0 Lite chip. It says Xecuter2 under the X at boot, but boots to the stock dash. I've held Power and Eject for a few seconds each at boot, but no change. What's my next step? I thought holding one of the power buttons was the way to do it. I'll add pics soon. Removing the Bios jumper makes it FRaG with no A/V. Removing the On/Off jumper defaults to the stock bios, stock dash. Removing the Flash jumper has no effect.
-
I'm creating my dragon image on a 4tb drive with bios cerbios I then filled the R and S partitions with the full set of xbox games and I am making the various connections with xbe shortcut maker2.0 from the dragon folder located in partition F Unfortunately, all links don't work As if the software fails to manage the 2 new partitions Are there any solutions at the moment?
-
Hey there, I have an Xecuter 2.0 Pro which I removed from a dead Xbox. It was soldered directly to the LPC pads. I put it in my TSOPed 1.0 (pin header) and all I can get it to do is FRAG. According to an old install tutorial I found it is supposed to FRAG when the chip is on and your D0 is wired correctly, and I'm fairly certain that connection is good. My trouble is that the DIP switches don't change anything. If I have that chip plugged into the board, it frags no matter what. This is a really old chip and it has an external LPT programming interface. Should I try to hook that up while its FRAGing? Has anyone every installed one of these who might be able to give me some insight? Thanks!
-
Does anyone have this old pc app anywhere? I need it for X2 bios editing but i only have version 3.5 and can't find version 2.0 which is slightly different when exporting .x files for injecting into bios's. +10 internets if you can find me a link to the right version
-
MAMEoXtras 2.0 runs just fine but all the MAMEoXtras updated 2018/2019 just reboots my Xbox when executing the .xbe, tried deleting udata/tdata/cache, still the same, what could be the problem?, thanks for any clues.
Board Life Status
Board startup date: April 23, 2017 12:45:48