Search the Community
Showing results for tags '13'.
-
Good afternoon people!! Guys can someone help me fix my Xbox it was working normally but with a while XBMC started to crash very often not only it but the games too until it crashed with an error 09. One hour you turn it on and it works more crashes after one time and another he already gives the error. It already crashed with the following errors 07,08,09,13 and 21. and apparently "Partition E" is self-corrupting causing the video game to run out of dash and causing the error. Does anyone know how to fix this error, My HD is a 500gbs Western WD Green. https://www.mediafire.com/file/z51tk6qossm3y3t/20221101_151404.mp4/file https://www.mediafire.com/file/k77g7gwuueaike7/20221101_151441.mp4/file https://www.mediafire.com/file/ubbwh7pj0ysu7lj/20221101_151458.mp4/file
-
All Xbox's I mention are Tsop'd 1.0,1.1& 1.4 .I'm receiving the errors above, this is only with the sata HDD and a convertor I got off ebay. I have one in another tsop xbox and it runs fine So I have 3 convertors, all are the same and 1 runs just fine. The other 2 give the error codes above. The one working is using the original Xbox's IDE Cable with a slow 5400rpm 2tb Drive. Works flawlessly The other 2 Tsop xboxs ( 1.0 & 1.4 ) do not want to accept the Sata Drives, Their original Stock HDD with UNleashX Dahboard works fine on both. All drives are set to unlocked the 1.4 runs EvoM8+ The 1.0 Run x2 5035? Think thats right. - Same as the 1.1 that works. I've read this could be an issue with the Sata Adaptor, IDE Cable only being 40wire, Drives or Both. Its worth mentioning I've tried a few different hdd's with the same issue on all Sata's. I can get Hexen2020 to boot on both but Hexen also struggles to read the drives. On the 1.4 I backup the Eeprom to the HDD and it will boot but to the Xbox Dash and as soon as I try with the UnleashX Dash I get the errors again. I am close to ordering an 80wire ide cable to try see if this resolves it, Failing that The more expensive adaptor for IDE made by Star tech which i'd wished to avoid. 1 more thing, the IDE to Sata Adaptors being set to Master gives the error. Without the Pin in cable select does nothing but freeze on the Blob Screen Slave mode causes it to freeze also. Any advise is really appreciated.
Board Life Status
Board startup date: April 23, 2017 12:45:48