[Can't reboot Xbox trough button combination]

10 hours ago, KaosEngineer said:

Did you try both triggers and back and BLACK?

You mention it worked before, were you using the Evox dashboard then?

Yes, I tried.  I was using Unleashed dash. 

[Can't reboot Xbox trough button combination]

1 hour ago, KaosEngineer said:

Evolution-X's M8 and M8plus BIOSes are a bit finicky about activating their IGR (In-game Reset).

Try holding both triggers down then add the back and black buttons.  Does it work?

It doesn't work. Damn. 

[Can't reboot Xbox trough button combination]

I have an 1.6 Xbox with aladdin Chip and now I can't reboot the console using the combination both triggers and back + Start. It used to work before. I don't know what happened. 

I use Unleashed as default dash and XBMC4GAMERS as an app. Both doesn't work

Thanks

[Possible to connect xbox via internet with my PC?]

5 minutes ago, SS_Dave said:

You can connect the Xbox to your home network then connect to your Xbox from any computer on that network and FTP to it.

I found it easier to have the Xbox set to DCHP.

 

What dash are you using on the Xbox?

 

Cheers

SS Dave

Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

 

 I have two dash. Xbmx4Gamers and Unleashed 

 

How would I do that? I can't find any tutorial or something. 

[Possible to connect xbox via internet with my PC?]

16 minutes ago, bolofski said:

you can ftp to the xbox with a program like filezilla easy enough

I am not talking about connectint the Xbox to PC with the ftp cable. 

[Possible to connect xbox via internet with my PC?]

Hello.

 

I would like to have a folder on my PC with xbox games and I want to know if it is possible to connect my xbox via internet to the PC with some kind of internet browser and insert a ip or something and copy the xbox games from my PC to the Xbox. I have my console connected to the internet with ethernet cable.

 

I know it is possible to connect both with crossover cable but I am talking if I have my PC on the living room and my xbox on my room.

 

Thanks.

[Xbox not recognizing all HDD space.]

5 hours ago, SS_Dave said:

What Modchip has it got?

 

Cheers

SS Dave

Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

 

 

 

Aladdin XT Plus2

[Xbox not recognizing all HDD space.]

7 minutes ago, SS_Dave said:

Your Mod chip will need flashing with a new bios as the old EvoxM8 would only support 137gb of HDD space and the new bios will support a 2tb or 3tb(2.2 usable).

For the version 1.6 I would use the EvoxM8.67.bin

 

Cheers

SS Dave

Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

 

Is that bios on the OGXbox 2021? Is it safe to do so?

[Xbox not recognizing all HDD space.]

After I modchip my 1.6 Xbox I put a new hdd and prepared it and at the end it opens the xb partitioner and I format my hd in there and all the left space I put it in the F drive which is around 238gb. When I return to the dash it only appears 123 gb. 

 

Thanks

[Alladin Chip keeps the red light on]

5 hours ago, SS_Dave said:

The heat sinks can get to hot to touch and defiantly to hot to hold your hand on it especially when the Xbox is running with it disassembled as the hard drive and DVD drive holders form part of the thermal ducting.
also the temperature reading in Evolution X dash can/will read 7 to 8 degrees Celsius hotter on a version 1.6

The 80 way IDE cable can help with data transfer when using large hard drives (160gb and up)

 

Cheers

SS Dave

Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

Thanks man. You're amazing

[Alladin Chip keeps the red light on]

7 hours ago, SS_Dave said:

It is fitted in a version 1.6

2 options

1st is cut the 5 volt supply pin from the LPC pin header.

2nd is to cut the led trace on the mod chip and reroute to the 3 volt supply like the black line. This way the led is switched and it can still be used in the 1.0 -1.4.

I also link the BT to pin2 and not to the power button as shown in this pic

 

Cheers

SS Dave

Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

Can you please take a look at my second question? I am kinda concern. Maybe it is some flux on the motherboard that hasn't been properly cleaned up?

[Alladin Chip keeps the red light on]

Hello.

 

1- I installed for the first time an Alladin xt Plus2. When I just plug my Xbox with the Power cable the red light on the chip immediately turns on. Shouldn't turn only when I turn on the Xbox?

I am afraid I did smth wrong. The chip works fine anyways. It appears the EVOX logo. 

 

2- Is it normal xbox heats up more than the usual before I installed the chip? The heat sink kinda burns after the chip installation. I changed for a new 250gb hdd. Is that the reason for the heat problem? Should I change the cable for an 80 pins to don't heat up a lot?

 

Thanks. 

[Modchip over Softmod]

1 hour ago, SS_Dave said:

If the hard drive is a stock drive or it doesn't have any thing you need to keep the fit the mod chip and boot from your install disk and run setup a new drive.

 

Cheers

SS Dave

Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

 

 Thanks man. I got kinda confused. Let me see if I understood. I install the modchip, after that I put a new HD and run the DVD (I got the ZXB Installer),  to copy the files to prepare a new HD. That should work right?

[Modchip over Softmod]

1 hour ago, KaosEngineer said:

Yes, it can interfere.

You need to boot an installer disc such as, don't get onto me @sweetdarkdestiny, HeXEn 2018 to clean the softmod files off after installing the modchip.  First, download all of the content off of the C drive then boot HeXEn 2018 and run, I believe, it is Menu option 3.5.2.

Where the hell do I download that Hexen 2018?

 

Thanks

[Modchip over Softmod]

I got an 1.6 xbox softmoded and I want to install an aladdin chip. Is there any possibility  Softmod interfeer with modchip? 

 

Am I good to do it?

[Hdd Upgrade]

2 minutes ago, Ging3rguy said:

Yes, you can go up to 2TB, you will need to upgrade your ide cable and get a sata adapter unless you go for a smallish pata drive. Mario has a youtube vid and walks you threw it.

I Just want a 250gb. Is it the regular mode?I mean using the chimp?

[Hdd Upgrade]

Is it possible on a softmoded Xbox put an HDD larger than 120GB? If it is, how? Is it the same process as for the 120GB?

Thanks

[Chipmod or Softmod]

Is  there any way  to know if the xbox is hardmoded/chipmod or softmoded without openning it?

It has two boot options. 1 on the power button and the other on the eject button. One for unleashed and other one for xbmc

Thanks

[XBox 720/1080]

Just now, SS_Dave said:

You need to change the video region to NTSC and don't use 1080i stick with 480 and 720.

 

Cheers

SS Dave

Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

Thanks man. You're a really good helper. You should get paid for thIS ;d

[XBox 720/1080]

Is it possible, somehow, force Xbox to display 720p/1080i video resolution without changing the region of it?

Is it safe to force it?

[Dead Dvd Drive]

Hello!

 

I have an Xbox with a complete dead DVD drive. No sound, no nothing and I got error 12. 

Is there any slution to fix the DVD driver?

Thanks!

[XBox Region Change Won't Save]

6 hours ago, KaosEngineer said:

How is your console modded? Soft or hard mod?

Must be softmodded with a virtual EEPROM (copy in memory) enabled.

If softmodded, which softmod package was used: Xbox Softmodding Tool or Softmod Installer Deluxe, etc.?

If you used the Xbox Softmodding Tool, use the NKPatcher Settings app to change the region.  It will modify the real EEPROM chip on the motherboard instead of the virtual EEPROM in memory that gets reset when you power cycle the console.

I used the installer deluxe

[XBox Region Change Won't Save]

I have a Xbox classic and I need to change its region from PATL to NTSC to enable the HD on xbox and yes, I am using Component Cable and I am sure the cable works fine. I have used the enigma program to change it. It says "press A for PAL or press B for NTSC". I do press B but when I reeboot the console with the key combination triggers + white /black button the region won't change. I enter again on enigma and the region remains "PAL". I enter on the original dashboard, I went to Settings and the option to set the 480p. 720p and 1080i won't appear.

Someone told me about the Shadow C thingy but I don't know what is that and how can I do something to Shadow C.

Please help me. I don't know what's wrong. Thanks.

[XBox Restarts - Orange/Green Flashing]

I am sorry for the mistake but the light is flashing red and green, not orange and Green

[XBox Restarts - Orange/Green Flashing]

Hi

I have a softmoded Xbox classic and I unplug and plugged back in the flat cable and now, when I turn the console on it restarts 3 times and then its light flashes orange/green and I have no vidro nor audio. I need some help please.

1- Nobody soldered nothing on the xbox

2- It was working before I re-pluged the flat cables

3- I tried with Av and component cable and I am still having the same problem.