Jump to content
OGXbox.com

Smeagolized

Members
  • Posts

    32
  • Joined

  • Last visited

Everything posted by Smeagolized

  1. I disabled it. So I can get an img to load for the Folder only by putting folder.jpg inside it. No img available and xMugen are the custom folders inside the homebrew section. Soon as I move off my custom folders to the right I'm presented with your default Missing Artwork img as if it unloads.
  2. Unsure how to install roms for my emulators in xmbc4gamers
  3. What is dragon you have me intrigued kind sir
  4. Heimdalls? Hexen 2017,2018,2019,2020 i dont really know of any others but i just got my blank vertabrim dvd -r dvds tested with a game and they work great
  5. Tried to solder the pads for a 1.4 and ended up removing a solder pad. When I try flash it just gets stuck at erasing the 0 percent shows. My solder skills aren't the greatest so I'm not surprised. I've since got some conductive paint/glue and tsop flashed a 1.1 successfully. Is there any other way I can manage to tsop flash this Xbox even though the pads gone?
  6. https://gyazo.com/8f116b4a34f4e478647879340b7f74aa what bios @SS_Dave do you think i should go with? 1.4v revision
  7. Check Facebook market place and your local classifieds ads for people selling consoles and ask them if they would sell one controller or something. No postage weight times then and can probably pick it up for cheaper
  8. So I want to add some LEDs now to my Xbox. I don't have an understanding standing yet of electrical currents and voltages and resistors it'll be something I pick up as I understand but if someome could point me in the right direction or give me we ideas on the things I might need? I'm curious to how many LEDs I could run or how to figure that out.
  9. Over the past week I've picked up 5 1.1 consoles with a 1mb tsop bank. What BIOS would you recommend me using for the 1mb chip and method to flash it via the HDD. Note: I don't have a way to burn a disc with something like hexen so far so I'd be flashing via the HDD.
  10. What would coin-ops version would you recommend me to get for the biggest and best collection. Thank you Smeagolized
  11. Fixed it got it working now I'm just wondering if a 15,000rpm HDD would work in the xbox
  12. I don't see any reasons why it shouldn't but I was thinking about buying one
  13. On one of my xboxs the molex coord doesn't power up HDD's I've been able to get the Xbox running by powering the HDD by using the molex connector from another Xbox to power up the HDD. Any idea on how to fix this?
  14. Trying to upgrade my HDD to 1TB on a 1.4 soft modded Xbox. The 1TB drive is 2.5" when I clone the drive with chimp should I plug in the molex splitter to power the adapter or can I simply just use he adapter without a y molex splitter. Just tried to clone with chimp without the y molex splitter and said couldn't lock the hdd
  15. Revision 1.6 I have another Revision 1.6 Xbox that's working with a nulled HDD now. Picked it up yesterday along with a 1.4
  16. What bios would you recommend me to flash?
  17. So you would recommend xblast to flash bios from the HDD. Yes console is soft modded with jrocky5 1.17 Cheers Smeagolized
  18. Could I have some advice please on a way to TSOP flash a bios of recommendation without the use of the DVD drive. So off the hard drive or USB.
  19. Recently had a hard drive fail on me but i did null the hdd key before it failed. Just purchased a new sata drive but im having 0 luck figuring out how to obtain a nulled eeprom.bin or make one myself. If anyone could help would be greatly appreciated
  20. Top picture of clock capictor location https://photos.app.goo.gl/Ls3LDqbcJmC5JGEFA Underside clock capictor https://photos.app.goo.gl/8DnGxfPHNgrZeXrq8 TSOP ports https://photos.app.goo.gl/YnKvxMNpkQWUADSZ6 Powerboard underside https://photos.app.goo.gl/qThiJHmyb7M2g1J46 Where I shocked myself was touching the underside of the board opposite side to th AC power plug. Where the TSOP location is seems to be some conductive paint or something that little black splotch. Thought I'd get some clearer pics and more information for you guys. Thanks for all the help so far. Waiting on a multimeter ATM to Futher inspect.
  21. Reassembled and plugged in the AC power coord there's no lights on or flashing, no HDD spin up sound. The motherboard looked pretty clean and don't see any evidence of trace corrosion so probably a fucked power supply?
  22. Reassembling at the moment. Plugged in my power cord to psu detached from everything else and touched the opposite end of the board and gave myself a nice shock. Lol Yes before dissembling no lights, no HDD spin up sound. I'll see what happens after reassembling. My IDE cable seems slightly damaged. All working fine until I turned it off after a softmod upgrade. https://photos.app.goo.gl/CWEaXddLwAhvLKEt6

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.