-
Posts
7 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Store
Everything posted by DFire2
-
Even though this thread is two years old... This is a really slick idea. The controller ports are quite sturdy. May I take a stab at the wiring for this? You wired one of the ports (4 wires, we'll forget about the 5th wire at this point) into a 4PDT relay that is triggered by the dropping voltage of the PC in front. When the relay is on (no PC resistance), the relay just connects the normal port. But once the screen is in front of the PC, the relay triggers off (not enough voltage), and you tapped into the AV's composite positive wires (yellow, red, white). You wired those into the relay and possibly with a 12+ wire as the 4th, which are all triggered on when the relay is off. The other port is used for the ground wire and probably for physical support. Am I close?
-
Pico PSU Smaller form factor External DVD drive (detachable) 2TB laptop drive internal wireless controllers internal WAN Xecuter 3CE modchip ...honestly, these are just things i want to do to mine...
-
This is my xbox, owned since new. X3CE, 500GB IDE, internal wireless.
-
How did you get the strong 5v rail out of the 12v psu?
- 12 replies
-
- slim xbox
- xbox laptop
-
(and 6 more)
Tagged with:
-
Hey everyone, you may know me from the Facebook page (Wyatt Long). Been looking for a good group to do some hardware modding/adding. My current xbox is pictured below. Mods - X3CE modchip (v1.6 xbox) - Internal WAN (created video tutorial on that) - Blue LEDs in ports - Painted pearlescent white with blue jewel and cage Looking to do a couple more mods such as the Xerc IR mod and possibly some internalized wireless controllers. Also looking to externalize the PSU if possible (but having issues with that) Cheers!
Board Life Status
Board startup date: April 23, 2017 12:45:48