Jump to content
OGXbox.com

Bob_the_vampire

Members
  • Posts

    7
  • Joined

  • Last visited

Bob_the_vampire's Achievements

Newbie

Newbie (1/14)

2

Reputation

  1. Ok I really have a big thank you you made my day, even my week with that, it is back working wow! anything I could do for you?
  2. Hi, thanks for this it give me some hope, like you said I can cycle the RGB and dump the flash (2mb) but now i don't know if I can "explore" the dump file to know what happen or should I only flash back a clean dump without any more checks I joined the flash dumb if you think you can do something at a faster rate than me flash.rar
  3. So I made some more tests, today I received a second modchip (Aladdin Advance) it's basic but it make it work. After that I know my LPC rebuild is correct since this chip works well. So now is there anything that someone thinking about that could be first "repair" or at least extracted from it?
  4. So I've done the fix like you asked the four points was more camera angle then solder over the board but I fixed it anyway. For the test, both Xbox boot well when the chip ain't connected, both have red steady led on the modchip when installed (tested with switch in both positions) and the box reboots twice and frag And the D0 to GND test doing reboots and frag on the board I tested (LPC rebuild with header) Didn't done this test on the solderless kit
  5. I already tried, that's the second test board
  6. Nice, as I said it would be a pleasure to send you a backup as soon as it will live again Here is some pics of the install, all LEDs light up on boot but the LAD1 don't stay, it flash like the rgh led of a 360 and stay off after Last installed 10 years back, broke the LAD1 leg but it still worked back then Edit : Should I try an alternate LAD1 point?
  7. Hey Guys I don't know if someone is still looking for this but I got a xenium gold 24k. I could share the dump but actually I can't get it back to live, the box does reboots, frag and the chip led is red and never goes blue I found a guide how to install it properly but didn't find any guide how to use it after install a user guide with the switch position, how to get in the chip menu, if exist how to flash/read it outside the box or how to use the recovery mode Even the install guide I had to use the xenium ice one, it looks like this chip didn't made it to the market. I really would like to make it live again, someone help please

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.