Jump to content
OGXbox.com

Mu.

Members
  • Posts

    93
  • Joined

  • Last visited

  • Days Won

    5

Everything posted by Mu.

  1. It should also be noted that there is a space for a solder jumper in the space of R3 (just under the pin socket), which either connects the LPC headers RST pin to ground on the CPLD or to the Reset pin on the 49LF0X0 chip. I'm not well versed enough in this to know why this would be something you'd want, but having the option on this board seems very unusual.
  2. I purchased an XT+2 from AliExpress with the purpose of reprogramming it for XBlast purposes (RAM upgrades n such), but I found that this chip I purchased included an NPN transistor on the D0 line to properly drive it (rather than using the pin on the Lattice CPLD directly).The Jafar chip uses this same method albeit using a MOSFET of some description but the effect is the same. This seems like a new development, I haven't seen anyone else have a chip like this and I imagine most of the new ones produced going forwards will be this way. But it shows that the producers are taking steps to bring the modchips forward into the modern day. Here is a closeup of the board, you can see the added transistor.
  3. If I had to guess, it's probably that small two pin connector close by the D0 pad on the chip. It looks a little like a JST XH or PH connector of some size (probably 2.0mm or less). You can buy pre-crimped two wire cables for next to nothing.
  4. The Xbox doesn't output anything over 1080i, if your display is reporting 1080p it is either deinterlacing the signal or misreporting it. Also 1920x1080 photo/video support is a completely different thing from the A/V output.
  5. That's exactly what I did to my console, an OpenXenium is useful but if you're only using one BIOS it makes sense. The easiest way is to softmod the system and do it that way or use SDD's BIOS flashing package so skip softmodding altogether. You'd need an exploitable game of course but that's not difficult to get ahold of.
  6. It's absolutely possible, there should be a chip select or output enable pin on the package that'll let you choose between the two with (I imagine) the rest of the pins connected together.
  7. I had a spare 1.2 as a footrest under my desk for a good while, it's been cleaned up and put in the closet since then though.
  8. I'm glad they fixed the corruption on the boot logo, ever since the switch to 720p it was doing that for me without fault.
  9. I believe it's worked the same way as it always has: With the D0 pin of the TSOP chip connected to ground (or the TSOP removed entirely), the console will attempt to boot from a bios via the LPC header. Andrew Huang's write-up of hacking the Xbox goes into better detail than I ever could. It's always been a case of "tell the console to boot from the LPC header, provide it with code from a ROM chip of some kind", this is just an example of the very early, very crude way that it was done (and still totally could be).
  10. It's a UV erasable rom chip (an EPROM) containing a custom bios. To call it an EEPROM would be wrong in both its function and its contents. And it looks like that because those things came in large DIP packages just like the 8086 did.
  11. That's absolutely an option you can take in the meantime. A softmod will do just about everything you need to. I'd prefer it over keeping the current chip installed.
  12. Separating the boot animation into a separate .xbe file was a great idea, both for providing extra space for cerbios code and also for customisation. Hopefully we'll begin to see more custom anims in the future. Also thankfully, not including a bootanim at all skips it entirely. I was hoping that would be the case, and it is.
  13. my impatience
  14. projects dead lol
  15. Must be a very old chip installed in that thing if it uses a dedicated switch for that purpose. Any idea which one it has?
  16. Its just strain relief, best to keep it on if you can rather than take it off entirely. Or if you're an uncaring monster you could use hot glue or something.
  17. It depends whether XBE Shortcut Maker is being actively developed or not, if not you'll need to fix it yourself.
  18. My heart bleeds for that poor console. Its funny how this fake restoration dross can be both glaringly obvious for some and also just as convincing for others. Don't get me started on the bogus "animal rescue" videos that people make out there too.
  19. Guess I'm ditching iND-BIOS once this release drops.
  20. Seems a waste to hack up communicators for this purpose, especially when custom PCBs exist to do the same job as well as the possibility that communicators will become useful again for their intended purpose.
  21. Mu.

    SATA to IDE adapter

    Speed comes second to the fact that the StarTech adapters I've used all boot up every single time, while the three or so generic adapters make it like a coin toss.
  22. Mu.

    SATA to IDE adapter

    Give me StarTech or give me death!

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.