willers

zzattack if there's still availability for one of these boards I'd like to put my name down for 1 please. Keep it coming !!!!

I'm boring just the same iND 5003.06 just like the modchip, what would you recommend I could try? Actually if I were to change to 5003.67 would I lose everything on my drive? Now that I have the the TSOP and modchip is there recommended way that they compliment each other like say a recovery method in case something goes wrong with either ? Or what are people doing with this type of setup?

Excellent these files worked and Xblast loaded so I was able to flash the TSOP which is a winbond 256kb chip according to Xblast if anybody wants to know. Thanks for all your help you guys, I don't now how it is you can figure this stuff out from where ye are.

Your files worked and it loaded Evo X but when I loaded into TSOP raincoat utility this came following came up. If I try using the flash bios menu it gives me this message after selecting the Bios to flash. Xblast causes error 21 even while trying to load it from Evo X under apps and so is XBMC if that helps?

Got my hands on the OGX installer 2021 latest version on here. Stuck in original 8gb hard drive formatted C and E. Crashed again with preinstalled softmod files each time I enter load checkpoint. Now I'm thinking it's hardly possible it's caused by game being PAL and my system changed to NTSC? What application had I used to change that setting? Found it, enigma it's called but that made no difference error 21 again. This is doing my head in, I'm ready to give up.

What is the best way to start fresh like formatting the original drive?

Would it be worth while putting in original stock drive and reformatting and starting over with that and then try?

Error 21 again using the link above for the new u data folder.

Game is booting but when I go to start game select Linux as profile. Then I see check points or levels but nothing to select. If I select using A on check points black screen error 21.

Microsoft Error 21 that time.

Crash everytime I load the checkpoint in splintercell. I'm just thinking as I'm unable to boot from original bios as Xbox has 128 mb RAM installed does this mean the mentioned methods will not work? I'm booting from modchip into iND Bios 5003 which I've now managed to finally hold down with another type of screw and washer. Am I going to be able to access the onboard TSOP to flash it?

Thanks looking forward to trying this out

Perfect I have splinter cell, where do I get this save game file to the flash bios?

Ok my situation I believe might be different from the normal person. I already have a crappy solderless modchip that will not for some reason stay in place where I have to press it down to get it to work/read the bios. So say I have soldered my points and I'm ready now to flash the TSOP. If I boot my Xbox holding the chip down. Open Xblast while still holding the modchip down. Leave the modchip released and then flash? I'd imagine Xblast would try to flash the modchip rather then the TSOP? Would I need to softmod in order to TSOP? Just trying to understand and do the quickest way to TSOP flash.

I've always used Ind5003.06 with my modchip, I thought Ind5004... was buggy and could brick Xbox? Is it better to use .67 than .06? I know it relates to giving drive F and G but is it best to use one over the other and why?