Jump to content
OGXbox.com

Canhaotigerpaw

Members
  • Posts

    24
  • Joined

  • Last visited

Everything posted by Canhaotigerpaw

  1. Cant manage to get a pic of it under 2mb..
  2. It doesnt goes to xbox screen so cant do y thing.Might get it to a repairman to see what he can do. D0 point Its to small of a trace for me to get to it without ruining it more.
  3. Same thing. Now i think i just screwed burned the d0 point on both sides of the board..... Fk.as this is a 1.0 i think theres nothing i can do anymore. Might scrap the Mb and salvage the rest for parts... FK
  4. Cant remember. But i lost deleted all info on the original hdd back then. The thing doesnt even go to the xbox splash screen now, dont know what to do with it.
  5. Yes i did that years ago. And in the processe of young age i managed to lose all content in the hdd back then. So thats why the chip.Had this xbox stored ages ago. Can it be the psu?
  6. The chip is out. It doesnt go to splash screen. So i dont have an error code to refere to. The thing is i power it on and it goes off and cycles on off until it stopes and gives me the cycling lights. I have 3 more xbox 2 softmodded and 1 hardmodded with aladdin chip with no pinheader just wired. This one is my first xbox that i screwed with a softmod....thats why i tried to put a chip on it. The d0 for me isthe most dificult to put on as it always comes lose. My hard moded xbox sometimes does the same as i power it for the 2 secs predicted to power the chip.it only goes to the chip wen it gets to temperature after running for a few minutes in the other mode.
  7. Red and green flashing. The caps look good. No clock cap installed.
  8. So i have a 1.0 xbox that doesnt stay on, 2 times it goes on off and then stays blinking. Tried to install a aladdin chip and it does the same. Any advice? What may be the faulty part?
  9. Hi i would like to know how is this done please
  10. So they are tp slow to boot but might work???
  11. Hi guys im back. So i have a question, can any of this sata hdds be an upgrade tp a xbox with evox-m8 bios? Wester Digital-WD5000AADS Maxtor-YAR51HW0 ExcelStor-J9250S Thanks from Portugal
  12. The bt wire goes to r3g4. My hexen says im missing the ms backup
  13. Its working just fine now that i cleaned under the MB.thanks.
  14. I dont have any wire conected from the mod chip to the bt 1x9 conector. All wiring goes to the MB but i cleaned the bottom side of themb and now works just fine. So my problem is: can i put a bios that recognize a new hdd and formats it? With out having an hexen disk. Mine is a 2017 and i think its not complete. The 2018 i got from here its not reading.....
  15. When i got this xbox it already was without the clock capacitor and had the chip instaled. Its my first hardmoded so noob here. Have 3 more setups 2 softmoded and one dead for parts
  16. Nope i did nothing. If i press once the pwbutton it goes normal ms dash. If i press loger as usual it doesnt go to the hardmod xecuter bios and evox dash anymore, it does go on even. Already changed the buttos assembly and it does the same.....
  17. Ok now i have a power button problem... pressing eject or power once it goes to ms dash, if i press longer te power button ir should go to the hardmod mode but it isnt doing anything iteven dont powercycles. Whats wrong? Already replaced thw entire front panel.
  18. What should i do here?
  19. So what i have is this
  20. As soon as i get home il make some photos of it thanks what shoul i do hera?
  21. Im using the latest version. Does the patch erase anything on the hdd as it s the original one and i dont have a copy of it.
  22. Thanks i was trying to clone the hdd with chimp and it freezes on loading. What can i use to clone my hdd other than chimp?
  23. Any one can identify this chip it has no marking and at startup it sais xecuter 2 but cant find an identical one

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.