finalman

My mistake as I was looking at the bottom my the PCB I bought a few years ago and couldn't see the join between the two. Also couldn't see it on the dirtypcbs pictures. Turns out it's on the top of the PCB.

Note to N64... Too late for me as I already purchased PCBs recently but if you update your design again you should join both of the 12v pads rather than just the one. That way if there is a poor/dirty/damaged contact using a 20pin power supply switching to using a 24pin power supply will allow access to the 2nd 12v rail.

What watt rated resistors should we buy? 1/10, 1/4, etc.

1. So if we choose the "max 10x10 +$5" The PCBs will be the same size as the ones pictured in the OP? 2. If we order through DirtyPCBs we get 10 PCBs right? 3. DirtyPCBs link is only for the bare PCB/s right? 4. What about the copper thickness is 1oz OK? Sorry for all of the questions but I previously purchased a prebuilt one off of you directly.

Dirtypcbs lists the size as 10cm x 10cm or you can chose 5x5cm on checkout but the PCBs clearly aren't an even in length or width. So what options do we choose at the screen after we click add to cart?

I have decided to have a go at making my own ATX to Xbox PCB version for my Xbox in a PC case mod. What I want to know is if anyone knows where to get the female ATX connector separately as seen in red in the attached picture. Prefer not to by the whole pico adapter just to de-solder the atx connector.

Actually it is the fan shroud you are seeing. I'm currently doing up a build log over on imgur you can find it here..

xbox motherboard in a pc case you say. BAM... N64 Freak Got your adapters yesterday. I'm putting them together today. They're gonna go in my two xbox PCs. HINT: Anyone wanting to put a xbox motherboard in a PC Case to: make the job easy you need to: 1. Make a MicroATX size (244mm x 244mm) adapter Plate that has both the PC motherboard standoff holes and the xbox motherboard standoff holes. 2. Position the Ethernet port directly behind the 2nd PCI slot down. I'm currently doing up a build log over on imgur you can find it here..