franci06

Ok, just found out the pin 5 is not the issue, still the console won't boot with the modchip

Hi everyone, i have a 1.3 xbox with OpenXenium that i recently installed, however when D0 is grounded via the modchip or the ground point the xbox frags and won't load the modchip. I checked everyting and the joints are ok and also the traces. The console works fine without the D0 grounded since loads the default bios. By checking with the multimeter while in frag i discovered that the pin 5 is 0.19v instead of 3.33v. The pin is 3.33v when the D0 is not grounded.