Jump to content
OGXbox.com

ChewbaccaSaurus

Members
  • Posts

    6
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

ChewbaccaSaurus's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. I'm using a pound HDMI cable for the system. I'll definitely give the original AV cables a shot and a different TV. I don't quite remember the revision of the board I know it didn't have the gpu fan and it was built in 2002. It's been a while since I've had it open so I apologize not knowing the revision.
  2. Hey, everyone, I was hoping some of you might have an idea of what might be wrong. I'll start off with it's a tsoped xbox running unleash X and has been running strong for the past year or so since I did that mod. Recently I took it out and decided I wanted to play it again and it booted up just fine did it's normal stuff the dashboard loaded and then after playing one game went to a black screen. Since then the system will not output a signal at all. No error lights are displayed on the front of the console and I've tried booting with and without a disc. The hard drive sounds like it spins up and tries to access just fine. So I'm not quite sure what could have gone wrong for it to not output a video signal? Any help or ideas would be greatly appreciated.
  3. Hi again , sorry for the late reply I thought originally it was the clock cap not allowing the system to boot but it turned out the HDD was just slow to spin up I had to reboot the system about 3 times before the Microsoft logo appeared upon boot and loaded into the system. I think the system had been sitting for quite some time before me buying it but all seems okay now and I intend to replace the hard drive with a bigger 1tb sata drive. Also, it's a v1.2 Xbox
  4. Good news and bad news, Good news is only one line was bad and I jumped it with a wire and soldered it in place and the system turns on with the button and ejects the disc drive bad news is I was hoping the clock cap would work just enough so I could soft mod the system so I didn't need it anymore but that's not the case it gets stuck at the xbox logo sadly. Is there any way around replacing it instantly? can it fetch time if it's plugged into internet like old pc's did?
  5. That was it I've opened it up and the clock cap has leaked so I'm going to clean it up and see which traces are broken with a multimeter and repair them. Thank you for your help I never would've thought the clock cap would affect the front panel controls.
  6. Hi all I recently picked up an Original Xbox to mod (unsure of version due to it not working). and when I plug the power into the unit it starts up without the press of the power button, It posts on screen with the startup animation but ends abruptly and shuts off just to turn back on 2 seconds later this time with no bootup screen. This cycle continues until the power is disconnected I've tried fiddling with the power button in hopes it was just stuck with no avail. Any help would be greatly appreciated thank you.

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.