SS_Dave

You can't make everyone happy. Why not use the configuration program and edit the IGR to what you prefer. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

Have a look for reinstall original dash or some this like that or possiblely rebuild C drive. I don't use Hexen I only use OGXbox installer 2021 and lately I use Fatxplorer v3.0 beta and connect the HDD to my PC tp repair and make a new HDD/SSD https://1fichier.com/dir/mX1kipIz

Thank you Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

Where did you get the EvoxM8 bios as on some of the Hexen disk's the EvoxM8 bios files had the DVD option removed so the DVD drive would not work again What version of Hexen did you use? So you can FTP to the Xbox then? Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

That's sounding like a capacitor problem can you upload a pic to a share site ( I use https://postimages.org/ ) and post a link to the image here. I would also backup any files you really need to a PC and then format the hard drive using Fatxplorer V 3.0 Beta and then start a fresh by installing a new clean set of files to C drive and a new copy of xbmc4gamers to E: drive Here is a tutorial un using Fatxplorer https://www.hazeno.com/og-xbox-hdd-upgrade here is a link to the download for xbmc4gamers https://drive.google.com/open?id=1je41mKY0Qm7L3P1zbZkcgt7VphEhYFz2 Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

Unless this happened with the chip was been updated powering off even a fraction into the boot process would not cause a issue, I have done that plenty of times. See what happens when you have the new caps in the board. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

The caps next to the heat sink defiantly need replacing Is the Xbox still booting with the modchip unplugged? And what happens if you power on the Xbox using the eject button? I find sometimes it helpst to unplug the mains and press the power button the reconnect the mains and see what happens

I helps a hep if you add some high quality pics of your work, upload the pics to a share site ( I use https://postimages.org/ ) and then post the links here Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

Restarting it should not cause the issue and it would help if you get some high quality pics of the LPC solder work and some of the top side of main board If you upload the pick to a share site and then add the links here then we can get a look ( I use https://postimages.org/ ) Error 7 is the HDD timed out but that will not stop the Open Xenium from displaying when you power on with the eject button. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

So it's a 1.4 then there has been posts on here and on Reddit with people swearing they have modded heaps of 1.5's but when asked to prove it like you just did they never return. In the 1st YouTube clip I watched the person was showing how to test for a 1.5 he then his meter set to ohm's and then had one probe on the screw hole and the other on pin 1 (LCLK) and saying this proves it a 1.5.. It also made no sense to write 1.5 on the chip and the MB.. As you now have the HDD soft-modded why not add the links to R7D10 and R7D1 then re-flash the onboard bios with cerbios. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

The log has some entry's relating to the skin, The easy fix is download a new prebuilt copy of xbmc4gamers and FTP that to the Xbox and overwrite the current files https://github.com/Rocky5/XBMC4Gamers Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

I suspect the board has or had a gold coloured clock cap and the installer assumed it was a 1.5 and added the 2 extra links be cause they didn't bother testing it 1st. I also don't understand why write 1.5 on the board and chip as the Aladdin comes with a bios that is compatible with all versions of OG Xbox ( 1.0 - 1.6 ).. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

Have you removed the link from pin2 and ground and tested pin 2 for a short to ground and tested pin 9 for 3.3 volt.. Would you like a copy of that ultra rare bios file that was extracted from a Australian Halo Xbox dated 2003 Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

I have updated my Steller chip to 1.1.0 I tested a 2tb origins HDD that boots on all modchips/modded bios and it would only boot to the MS dash A 2tb HDD that's not cerbios formatted with xbmc4gamers in a folder on e called dashboard loads fine A 3tb HDD with F and G equal splits that loads fine with cerbios reports as no HDD A 1tb SSD that's formatted with cerbios compatibly that I put xbmc4gamers in a folder called dashboard will load 4gamers but it can't find any apps, Homebrew, Games on the drive and the file manager in 4gamers thinks there is F drive put reports path not found. On the plus side it no longer only enters safe mode if you don't have a DVD drive connected. Whoopee !! So for some reason he hasn't or won't add cerbios compatibly. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

The Xbox motherboard is a 4 layer PCB and if you have ripped the plated hole that's connected to the middle traces from the board there is no coming back. The best thing you can do when learning to solder is find old electronic circuit boards and practice I also recommend you have a read of this tutorial https://learn.adafruit.com/adafruit-guide-excellent-soldering/common-problems Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

The latest version of Fatxplorer is fatxplorer-3-0-beta-22 and the software auto checks for updates on loading. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

Good by Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

Have a good look at the section in red as I have seen trace damage here from a leaking clock capacitor and they are the port 1/2 traces Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

the parts you have listed are only for the clock cap and not the controllers Do you have another Xbox to test the original controller? If you have the DVD kit you can use that to set the clock or at least skip the clock setting and then the non original controller should work. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

I agree and I do this the chip has a lot of potential so I will wait and let some of the bugs get sorted. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

I believe he did the same with the Open Xenium update to some degree as well as I have had a couple of people have issues after updating the OS to his version. I have also seen some comments about people that have ordered a chip and he now is not replying to there contacts about why people that ordered a chip after them have already received there chip. I think I will stick the Stella chip back in the box and wait 3 months and try again, I should have known you never buy version 1 of anything. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

So is he saying he doesn't have a team of independent beta testers to give feed back before he released a product?? Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

Sounds like he didn't full test it before releasing the 4 or 5 updates already So I will need to format again. I don't really see why he is trying to 3rd line enforce using only his software or has he been taking lessons from Crapple. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

I finely got around to setting up the Project Stella chip. After eventually getting it updated because his severs where running slow. So far I am NOT Impressed, I fitted it in place of a Open Xenium in a version 1.1 and it constantly booted in to safe mode telling me I have pressed the eject button, It doesn't like not having the DVD drive attached and adding a link on the DVD power connector to tell the MB the DVD tray is closed fixed that, It will not boot to a 3Tb HDD ( formatted as a 2.2tb ) that boots with all other bios files even though it's not formatted with cerbios let alone look at the 4tb formatted with cerbios. The 2tb HDD then has xbmc4gamers as the default dash will only boot to the M$ dash So far it's a huge thumbs down from me. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

The Cerbios supports IGR ; IGR Master Port, 0 to 4, 0 = All Ports IGRMasterPort = 0 ; A = 0, B = 1, X = 2, Y = 3, BLACK = 4, WHITE = 5, LEFT_TRIGGER = 6, RIGHT_TRIGGER = 7 ; DPAD_UP = 8, DPAD_DOWN = 9, DPAD_LEFT = A, DPAD_RIGHT = B, START = C, BACK = D, LEFT_THUMB = E, RIGHT_THUMB = F ; IGR Dash Combo, Resets back to dashboard, If ISO is mounted then keep it mounted as IGRDash = 67CD ; IGR Game Combo, Resets the current loaded game IGRGame = 467C ; IGR Full Combo, Full system reset IGRFull = 467D ; IGS Shutdown Combo, Full system shutdown IGRShutdown = 678D Have you put the cerbios.ini on the root of C drive? maybe that some of the issue you are having. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.