SS_Dave

Ethanol is good in cars as well when it 85% or more Cheers SS Dave Those that can Hard-Mod. Those that can't Soft-Mod.

DigiKey at $1.47 aud each and element14 at 37 cents plus gst in AUD Cheers SS Dave Those that can Hard-Mod. Those that can't Soft-Mod.

I had a problem with using Tony Hawk pro skater 4 that would not work with the Pal (in Australia here)game save but would work with the Region free game save. Cheers SS Dave Those that can Hard-Mod. Those that can't Soft-Mod.

Talk about going the long way of flashing a TSOP. From around 2004 I have been using game save exploits to flash the BIOS without the need to soft mod 1st and have been able to use 007 Agent Under Fire,Mechassault,Splinter Cell to flash a BIOS. Cheers SS Dave Those that can Hard-Mod. Those that can't Soft-Mod.

Welcome Tonyvee73 Hope you can refresh you console modding memory and maybe help some of the others as well Cheers SS Dave Those that can Hard-Mod. Those that can't Soft-Mod.

I have tried both and after testing TruHeXEn it really it 6 of one and 1/2 dozen of the other. I still lean toward Slayer and it's probably because I have been using it for so long and the Hexen 2018/2019 pissed me off with the crap left on the drive plus one time i installed Xblast from the hexen disk and after rebooting the Xbox it had changed the dash as well. And I don't like when some Facecrap members tell me that slayers is old and to never ever use it and the only disk I must only use hexen 2019. So I would suggest the before you start loading the drive up Do an install with Slayers 2.7 and give it a go then try TruHeXEn and see which one you like. If you wan't there is also a Slayers 3.3.0 out in roaming about in wild as well. Cheers SS Dave Those that can Hard-Mod. Those that can't Soft-Mod.

It's a long shot put the drive back in the Xbox and load Halo2 to update the dash. Cheers SS Dave Those that can Hard-Mod. Those that can't Soft-Mod.

All the rebuild boards are the same and will do the same job, I just do it like the pic I posted. If your using one of the boards clean the location 1st with Isopropyl and a brush and when soldering use Flux it's your best friend when soldering Cheers SS Dave Those that can Hard-Mod. Those that can't Soft-Mod.

Yes truhexen is a ship load better then hexen 2018/19 and it no longer changes the dash with out been told to and cleans up after it's self like a good little program should. Cheers SS Dave Those that can Hard-Mod. Those that can't Soft-Mod.

Hello ShinGoutetsu I just tested a X3 chip in a version 1.1 that has one of N64freaks HDMI kits fitted and no problems get to the recovery screen but the X3cp in a version 1.6 with component out won't work with the power/eject and the only way to get to recovery is via holding the X button while booting. If your using NTSC try disabling all but the 480. Cheers SS Dave Those that can Hard-Mod. Those that can't Soft-Mod.

You could but I have never seen a master/slave on a Xbox DVD drive. Cheers SS Dave Those that can Hard-Mod. Those that can't Soft-Mod.

I used one of the rebuild PCB's once and the rest got tossed in the trash Cheers SS Dave Those that can Hard-Mod. Those that can't Soft-Mod.

Welcome Ravehead Cheers SS Dave Those that can Hard-Mod. Those that can't Soft-Mod.

Check the video output setting are not set to HD Cheers SS Dave Those that can Hard-Mod. Those that can't Soft-Mod.

Hello Halo_2 The clock cap that's in the version 1.6 and some 1.4 is a better quality but they are stating to fail. If you see any sign of bulging or leakage then you need to replace it as the Version 1.6 will not boot with out it and at $2 to $10 depending where your located properly worth replacing anyway. Cheers SS Dave Those that can Hard-Mod. Those that can't Soft-Mod.

No Cheers SS Dave Those that can Hard-Mod. Those that can't Soft-Mod.

With IND bios there is a config file on the c:drive you should be able to set it there or hexen can change the default dash as well Cheers SS Dave Those that can Hard-Mod. Those that can't Soft-Mod.

You will find that any time you use the Hexen disk it defaults your dash. I use a SlaYers disk that leaves thing alone and doesn't leave a foot print on your hard drive. Have a look at XBMC4Gamers but the choice of Dash is a personal thing. Cheers SS Dave Those that can Hard-Mod. Those that can't Soft-Mod.

What BIOS are you using? Also what version of XBMC? Cheers SS Dave Those that can Hard-Mod. Those that can't Soft-Mod.

All good I would not touch Hexen with a 20foot barge pole, the final straw for me was I tried to use one of the apps on the disk and when I rebooted the Xbox my dash had changed. Cheers SS Dave Those that can Hard-Mod. Those that can't Soft-Mod.

You can bypass the wait time with a small donation have a look in the store Cheers SS Dave Those that can Hard-Mod. Those that can't Soft-Mod.

Copy Xblast to the C drive and copy the bios.bin to a folder c:/bios Cheers SS Dave Those that can Hard-Mod. Those that can't Soft-Mod.

Here is Xblast https://www.dropbox.com/sh/s6a24019u5lsv2j/AABoyFw10RwO0QKNx2iU7AQea?dl=0 And here is IND bios https://www.dropbox.com/s/7izf8cxvzgsykmv/iND-BiOS.5004.67.bin?dl=0 Cheers SS Dave Those that can Hard-Mod. Those that can't Soft-Mod.

No you just fit the chip with the D0 wire from the main board going to the chip and the BT point on the chip to the power button don't worry about the L1 point and if you upgrade the HDD don't forget to lock it Did you know you can still use the MS dash with a mod-chip active (without using the MS BIOS) Cheers SS Dave Those that can Hard-Mod. Those that can't Soft-Mod.

1st off delete that BIOS checker it's CRAP. It only reports the BIOS that was used to boot and if you have soft modded it that's what is reporting not the onboard BIOS Chip You need to add the links on the main board R7D2 and R7D10 to enable the TSOP flashing. Then I use Xblast to flash the TSOP chip this what ever 256kb BIOS your planing on using. Cheers SS Dave Those that can Hard-Mod. Those that can't Soft-Mod.