Rocky5

Sounds like it’s TSOPPED, if it black screens after the Xlogo screen and never loads stage two then the softmod isn’t loading. It’s crashing. I take it you have enough space on E? (Over 30MB)

You will need to add the remote.xml https://svn.exotica.org.uk:8443/xbmc4xbox/trunk/system/keymaps/

You can’t there is not native VGA support, so it’s green tint if you don’t have a monitor that supports sync on green. This is why I don’t have it in the video menu, as it’s useless to 99% of folk. (It’s there disabled in the config)

disable the fast game loading in the skin settings toggles

Haven’t a clue when it comes to LCDs, none of the code was changed so unless it’s not saving to the LCD.xml or where ever saves to then I’m stumped. Also thank you, glad you like it.

You using the Xbox artwork installer?

That will load D:\default.xbe if it’s found, back if for dashboards and start is for reloading a disc or loading a disc.

LT+RT+Black+Back

Fixed

The initial exploit is NDURE, done by the font exploit. It’s crashing at this stage. ( if it was NKPatcher that the NDURE exploit loads the LED would be orange ) your issue I assume is the system is taking to long to load, like folk have said bad adaptor or dvd drive can causes these problems. ( cable also but you replaced that ) something at a hardware level is your problem, try running Chimp 261812 and using the fix error 16 option in the slave drive options to only reclone a working C partition, if it still does it it’s not software it’s hardware causing your problem. ( softmods support the partition table that’s required for a large HDD )

Try truning on with the eject button and leave the tray open. Its crashing at the exploit point and I haven’t a clue why other than the adaptor is slow & it causing issues. ( I only use sata drives and max is 640 or there about GB work no problem ) what colour is the LED when it hangs?

Head to NKPatcher Settings > kernel > advanced features apply the correct kernel font, it’s automatic so just select the option and it will do its thing. If that doesn’t work try adding a delay file. Select 1 reboot, if it still hangs select 2 then 3, I wouldnt go above 3.

You will need to edit the surreal.ini and add 4 lines ( enter 4 times ) after the first comments= line. the next update to emustation will has this fixed, as it was hard coded to look on line 20. The new version just scans the file for what I need.

Put XBP on the root of E ( it’s just an xbe file ) run it via a file manager using one of the discs or if running unleashx launch it via a raw site command. Site exec “path the xbe file” now partition your drive proerply, C and E shouldn’t need touching since it’s onky the extra partitions that every have issues with cluster sizes. Also what dashboard is it you’re wanting to install?

Yeah you can’t have a softmod installed and a modded bios. So you will need to remove the softmod. ( clean the C partition )

If using my softmod you will need to disable the shadowc, load the extras disc and do it then copy your bios to C:\bios\ and flash away with gentoox or xblashos

Download this. https://drive.google.com/file/d/1t9-Qlv33YFoOWS9zUKmN3roD85TyB3P3/view?usp=drivesdk follow the instructions and that’s you. It only replaces the softmod so everything else of yours will remain. The go to Applications > NKPatcher Settings > EEPROM > Advanded Features > HDD > NULL Key

This pack is unofficial and xmv is not 100% supported in XBMC so not all videos will play correctly. Use the official one from the downloader. No videos are included but I plan on hosting all the videos on my server so internet on the Xbox will be required.

Could you list the 40 games? as the current Xbox Artwork Installer has 1072 Xbox games all done with synopsis and artwork. I never knew about the one from heresy. Also if they don’t conform to the standards I set for this artwork pack, then they would never be used anyways.

Use ind-bios 5003 with the debug mode enabled.

Change the drive when Chimp loader has been loaded, it will ask you to change the drive and then press A. also make sure your sata adaptor has a slave jumper position.

Selective, clone C, E, F and G takes remaining space. This will put the remaining space of the 1TB drive on G. All your stuff from F will be kept this way but the partition will be the same size as it originally was. ( no way to resize partitions ) also use chimp 261812 or you won’t get the options above. If you get an error about the drive being formatted with unleashx or evolutionx dashboards you will need to run the XBP Tabke Writer app that comes with Chimp 261812, this will let you write a partition table to the master drive allowing Chimp 261812 to clone the drive properly.

80 wire IDE cable is required for sata adaptors or you will get error7 or 13.

No, it checks the items.xml on every boot and compares it to your paths in the config.xml Use XBMC if you don’t want to wait.

Q is always the root folder of the XBMC installation, it’s that was as it’s easier for the end user to install stuff. also script can be hard coded to Q and it doesn’t matter where you install XBMC. X, Y & Z are hidden as the end user never needs to enter these partitions. There is zero need for anyone to have access to these partitions. type the partition letter into the remote site bar and you can still access them, they are just hidden from the root tree.