Onionfatty

So it was the capacitors and the modchip tested it on another console same issue put another chip on work like a charm, that board is retired until I can figure out how to repair its traces if it isn't burned to the point of death on the capacitor solder points next to the heatsink by the power supply

I also tried to do the eject button boot but no dice before I started messing with the bulging caps. I'm pretty sure they were the issue but I can't figure it out until the traces are fixed if it is even possible smh I goofed heavily

It booted the first time. I think it was the caps however I managed to damage a trace and I'm not sure if I (me personally) can fix it sadly. Until I learn how to do trace repairs I guess I'll have too put the project on hiatus however I have 2 more working xboxs almost brand new that I'm thinking of installing the chip into instead until iam comfortable enough to try and work on that motherboard again which I'm not even sure Will work now as seen in the photos I linked

Could I use a wire to bridge the gap of the traces? I'm not saying I'm qualified but anything is worth a try for me also it doesn't need to fit entirely into the case if needed I'll get a 3d printed stand for the motherboard.

Welp seems like I fucked the machine at the last step not sure what to do kind of upset with myself... not sure what to do doubt I can fix it now really bummed out here. Trace ruined and burned the motherboard it looks like, was trying to use a soldering sucker for the first time because it was being extra stubborn. If there is anything I can do please let me know like I said previously i really dont want to have to give up on it smh I really dropped the ball on this one.

I havent tried it again waiting for my replacement caps they come tomorrow I already removed the 3 bulging ones. However the first pictures of the solder before I reflowed it is when I unplugged the chip and got error 07 I have not yet tested the console after I reflowed the solder due to those 3 caps. I will update tomorrow. I'll answer any questions to the best of my ability. Also the console was accidentally turned off in the launch menu (openxenium) before it started fragging.

Just reflowed over my solder havent tries anything yet going to wait for your response. Also found 3 capacitors by the heatsinks bulging havent touched them yet

are tthese good enough? I can take more. I'm also new to this soldering thing my 3rd project hopefully I didnt kill it I really dont want to give up haha.

More information: the chip was bought off ebay. And the xbox is not version 1.6 or 1.6b. 2003-01-25 < is the date it was manufactured I believe 1 number might be off but the year is correct.

Maybe it's a bad chip? Did i goof by restarting the console and kill it? Anyway for me to tell? Can it be fixed? I can also send pictures if needed.

So I installed a openxenium chip today and it turned on brought me to the os and I accidentally hit the power button and now it doesn't boot just flashes green 3 times and goes green/red. Even tried resoldering joints I'm stumped it was working and now it isnt... in the span of 10 min. Even tried a new hdd same issue. I also tried removing the chip and got error 07 it should be noted the chip was still wired in when I did that but not plugged into the pinhead (this is only when I was testing if it would run after it started fragging)