I have a 1.0 Xbox. It’s really close to
the 1.1 change over but pretty sure it’s a 1.0. It was starting up fans and drives originally but still FRAGing. I tuned up the disc drive and I can tell the HDD sounds like it’s not running well, but still no boot at all. I could at least tell that the clock Cap had leaked so I decided to pull that. I got it out nice and clean and cleaned up the area around it but it didn’t look bad. No corrosion on front or back really. I reassembled for testing and now I’m getting the same FRAG but with no boot sounds. No disk spinning, no fans, nothing except the FRAG light. All I did was take out the clock Cap. Thinking about doing a full Cap replace on the board and PSU. Any other advice or things to test first?