McFarTech

Thanks guys. Fitted my Mod chip this weekend and stuck CERBIOS on. All good

I have a 1.2 XBOX and ordered a Xecuter 2.6. Is there an install guide on fitting the chip and where to solder the cables in? Also any ideas where i can pick up some spare pin headers. just noticed the chip i have bought does not have them. Im in the UK

Thanks. Ive ordered a mod chip. Still want to go down the TSOP route though.

Well think ive made it worse. I think i have removed the ATA security which has let me get back in to the xbox but now the xbox wont boot because the drive is unlocked. FFS!

Thanks mate. I was hoping to soft mod and TSOP flash. No matter what i do i cant get Xplorer360 to see the drive. Is there nothing i boot from DVD to read the eeprom?

Hi Guys. So i was attempting to soft mod my 1.2 XBOX. I pulled the power from the CDROM, let it boot up and when the green error showed pulled the IDE Cable out. I then connected this to my computer with a IDE to USB adapter. I opened Xplorer360 and i was able to browse my drive. I was copying some files to the partition3 and it look like it lost connection. Now i cant get Xplorer360 to see the drive. I put it back in the XBOX and as suspected it did not boot but i also suspect that its no unlocking the drive now. So what are my options? Is there anyway of recovering this at least to boot stock? Its a stock HDD thats in there at the moment

Hi. No my HDD is 3TB the G: is just not showing the disk space. But i am still unsure. Can this be flashed without the HDD already setup for Titan or do i need to do that first and then flash. Its just not clear the order of steps

Hi Guys. I have downloaded the DVD and burnt it. I can boot the DVD without issues. I do have some questions. Right now i havre a Xecuter 2.6 and think its the CE. I am running X2 5035 1.6 137GB+ I am looking to use the Titan BIOS. So my questions. 1) Can I use the Titan BIOS on this X2 Chip? 2) If so can i flash the BIOS without the Hard Drive being prepared for Titan or do i need to sort that first and install to the XBOX? Thanks in advance for any help

Hi Team. Can i have a sanity check please. I have a Crystal Xbox 1.6 with a Xecuter 2.6CE i think. I have put a 3TB drive in the XBOX. Used HeXEn and setup the F & G drive and formatted. Am i now seeing 1TB on the F & G Drive correctly?