SuperWolf73

@KaosEngineer Ok got it, once again thank you so much for the help.

@KaosEngineer Thank you thank you thank you, I rotated the switch wires an was able to flash the chip and get access to the F partition. Also I used a 256KB bios should I go back and do a 512KB. But once thank you again for the chip info.

@KaosEngineer Thanks for replying. I was was able to get the hard drive setup, but I still can't flash the chip and can't take full advantage of my 320GB drive. Also I messed up an meant that even with the chip disable that when I try to power on the Xbox anytime with the unprotected switch off it goes to Gentoox, but with the protected switch on it loads to the new dashboard and engineering disc menu. So could that be why I can't flash the chip. Also sorry I meant to public message not direct

Hello to anyone reading this. My probably is I'm a noob who found an already chipped Xbox at a thrift store, an I'm trying to figure out if the modchip is going bad or if I'm doing something wrong I think it's a Xecuter 2 lite from my research. When I found this Xbox it was in working order, but the hard drive failed not long after I bought it that was back in 2020, so I set it a side for when I had the time to fix it. So now I've been trying to flash the new bios on the chip, but every time I get a "not writeable error" on it. I've tried the Slayer disc and Hexen 2018 and 2021 but nothing is working. also if I disable the chip something called gentoox pop ups. Any help would be appreciated.