Jump to content
OGXbox.com

bachmma1

Members
  • Posts

    4
  • Joined

  • Last visited

bachmma1's Achievements

Newbie

Newbie (1/14)

  • First Post
  • Conversation Starter

Recent Badges

0

Reputation

  1. Hi all I ended up using a WD Gold 6TB HDD and the CerBios 2.0.3R with XBMC4Gamers on the Aladdin Advanced. Followed almost exactly the steps in 16TB in an OG Xbox? CERBIOS has arrived. Until now - few hours - everything is working fine Thanks and greetings
  2. HI @coldasijs Thank you very much for your reply. I will skip the CPU/GPU-paste steps and just leave them as they are now, until I notice a temp-increase / risk temp. The tipp with a quiter fan is great, thanks. Didn't think about that - Lets see if I find one in my "old-tech-stuff-box" So you would recommend CerBios/Titan on the Aladdin Advanced, if I get you right. Greetz
  3. I answered the question "Is the step "BIOS Selection" with FATXplorer possible if the HDD is only/lower 2 TB (as the description for "Cerbios, Titan" says -> Only available for disks larger than 2 TB.?" myself via just trying It is the case, that cerbios / titan is grayed out with the 2 TB HDD.
  4. Hi, I brought my og xbox back to live and it is still working. But I now want to upgrade it with a 2 TB disk. I read a lot here in the forum and tried to find the components and bios I need for upgrade. So far my upgrade components are as follows: WD RE4 2 TB SATA (WD2003FYYS) Unpartitioned; Deleted partitions with easeUs never installed in a xbox Delock 62510 SATA 2 IDE Adapter (Successor of Delock 61702); According to data sheet: contains Marvell 88SA8052 Asus 80wire 40pin IDE / PATA Cable OGXBox 2021 (v1.5.4) Installer Disk Thank you very much Actual setup: Xbox Rev. 1.0 WD 200 GB IDE (unlocked) Aladdin Advanced with Xecuter2 4983.06 BIOS (256kb) EvolutionX Dashboard (1.8.3752) First I thought, I will go with a LBA48 modified/fixed EvoX M8+ CEE BIOS. After some reading of topics/posts on this forum, I stumbled up on the Original Aladdin Advanced Mod Chip comment from SS_Dave, where he recommend "IND 5004.67" for the Aladdin Advanced. Furthermore on youtube I saw the new CerBios 2.0.3R and found it here on the forum. This is is also a 256kb BIOS and as I get it right a brand new one. I think I will go with XBMC4Gamers, but not sure. Now I am not sure which BIOS I should use/flash to the Aladdin Advanced. Do you may have recommondations for me, which BIOS I should use? In addtion: Is the following plan I build in my head "correct" Open box and disassemble Clean MB and DVD-Rom Remove clock capacitor Clean GPU and CPU from old paste Add new thermal paste on GPU and CPU Install new 2TB WD, Adapter and new 80wire IDE cable Reassemble / close box Depending on BIOS M8+ (EvoX.m8.cee.67.noDVD.evoxdash.256.bin) / IND 5004.67 (iND-BiOS.5004.67.bin) Cold boot to OGXBox 2021 Installer Disk Run 2.2.1.1. Flash EvoX 256KB Bios (1.0 – 1.4) OR Run 2.2.3.2. Flash iND Bios (1.0 - 1.4). Do I have to worry about the "Err16 fix" because I removed the Clock capacitor and want to install on a "brand new"/unpartitioned HDD? Run 3.1.2. AiO Setup a new large HDD Run 4.3.6. Install XBMC4Gamers 8.2. Reboot the System (Without DVD). CerBios 2.0.3R Completly follow 16TB in an OG Xbox? CERBIOS has arrived (Borderline OCD) Is the step "BIOS Selection" with FATXplorer possible if the HDD is only/lower 2 TB (as the description for "Cerbios, Titan" says -> Only available for disks larger than 2 TB.? Having fun with 2 TB of Space Thank you very much in advance for your reply and help. Best regards bachmma1

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.