Slavik916
Members-
Posts
37 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Calendar
Store
Everything posted by Slavik916
-
I saw this video on replacing the diode, but when you turn it on, the coolers spin and you can hear it, and if there is no reaction to the button at all... the power supply is in perfect order, the capacitors are also in order, the coils and resistors near the processor power supply are checked, everything is checked, well doesn’t want to turn on and that’s it. I even bridged the block to start it... it doesn’t want to and that’s it
-
TL866 II Plus Programmer + Winbond W49F020T-90B
Slavik916 replied to sweetdarkdestiny's topic in TSOP Flashing
You need to use the DA 8C method and W49F020 profil ID BIOS.txt- 22 replies
-
Don't forget to cut the path. Marked it in yellow
-
TL866 II Plus Programmer + Winbond W49F020T-90B
Slavik916 replied to sweetdarkdestiny's topic in TSOP Flashing
You're leading me into a delusion! You have AM29F002B (AMD) on your video- 22 replies
-
Hello booter. No foto
-
I have frag. put mikruha from another box, everything works. I need to reflash this. I need the name of this microcircuit, what does Wikipedia have to do with it, nothing is said about this microcircuit. flashes as a catalyst, but xbox does not want to read it. there is atmel 24c02n but for some reason he does not want to enter tl866 plus 2. although he threw 8 and 7 legs
-
что он делает? Guys, the question was not about what is eeprom, but about who is the manufacturer of this microcircuit, because I need to flash it
-
xbox original flashes only orange and reboots 3 times. Turns off for the third time. What could be the problem? Xbox 1.6
- 16 replies
-
- xbox 1.0
- restarts 3 times
- (and 11 more)
-
Hi guys. Brought to the modification of the xbox original and see what I found. When loading, it showed xecuter2. Xbox rev 1.2
-
because cerbios loads even longer on 2tb
-
Here is the download without unnecessary inscriptions https://youtu.be/tVl2zo70HbM
-
how to remove the inscription "ind-bios loading"? How to embed the cfg file in the bios itself to speed up the download
-
Что я вам хочу сказать... атмел нужно шить обычным методом без ветров, а не раздельно. Сейчас пробовал перепрошить несколько раз. чип определяется нормально id 07 atmel at49f002a.
-
I spent 20 minutes not heating the soldering iron))), but for now I took it out, while I disassembled the xbox, removed the BIOS, programmed it, soldered it back. And the entire procedure took about 20 minutes in general. My soldering iron takes about 1 minute to heat up)
-
Taking into account the heating of the soldering iron and the removal of the alloy, I spent 20 minutes... slowly))))
-
Yes, I have heard that many contacts are not connected to anything and they are not needed. The client wanted to solder himself, but with a soldering iron he demolished the track. I brought it back. We have little such information on xbox original, so I turned here. Thank you for helping me. I have a 1.1 fee somewhere, I'll try to find out just in case. If anything, I will write
-
Finally, TSOP32 arrived for the TL866 ii Plus programmer. If someone has ST 40pin, you need to use tsop40-a 8bits!!
Board Life Status
Board startup date: April 23, 2017 12:45:48