Jump to content
OGXbox.com

tonix90

Members
  • Posts

    5
  • Joined

  • Last visited

Posts posted by tonix90

  1. On 1/10/2022 at 9:09 PM, sweetdarkdestiny said:

    Ok the x2 config ist still the one from me which makes it much more strange (but like I wrote, HeXEn didn't add a config at all). dash is in place, config is fine and  you have a WD blue which also works without tweaks (# head parking).

    The XBox workds with the old HDD, with the old and new bios and also with the same IDE cable.

    So the last thing I can think of is that you maybe use a 40 wire cable and the WD "need" an 80 wire cable in the xbox to work (Yea I know how that sounds). And in case you already use a 80 wire cable, I'm out of ideas.

    Maybe @SS_Dave or @KaosEngineer have an idea what you could to try next.

     

    EDIT: One more thing. Even it isn't a WD Green, it could be possible (If you bought the HDD second hand) that the previous owner has head parking enabled or the power management set to "low power".

    So download CrystalDiskInfo (if you don't have it) and check the settings like shown in this screen. The value should be set to 0 (Yeah, I'm aware of the typo in the titel :D:  https://imgur.com/a/hEsgaLC

     

    after i've tried all again, I notice that the old hdd is not read or montable with xplorer 3.0 on my pc
    I don't know what this could mean

    The cable in my xbox is a 40 pin one

  2. 4 hours ago, sweetdarkdestiny said:

    As far as I know HeXEn didn't replace or add a x2 config, it just flashes the bios which maybe didn't point to your Dash.

    Hook up the HDD to your PC and edit the x2 config by hand or add one if there is non. The dash should be in " E:\Dash\UnleashX\unleash.xbe "

    And one question, what type and brand of HDD do you use?

     

    I got still this problem, the old HDD works fine with the new Bios.

    I try it with the Jumper on MA,SL,CS and without

    x2config.ini on E: contains: 

    dash1Name = c:evoxdash.xbe
    dash2Name = e:evoxdash.xbe
    dash3Name = e:Dash\UnleashX\unleashx.xbe
    dash4Name = c:rescuedash\UnleashX\unleashx.xbe
    dash5Name = c:xboxdash.xbe

    I found the dashboard data under your given path

    my HDD is a WD5000AAJB

    I think my next step will be trying again to copy the hdd with chimp and hot swap

  3. 9 hours ago, sweetdarkdestiny said:

    That bios is a dual bios. It combines 2 bios files to fit the 1 MB which the Xecuter has.

    HeXEn should also provide a x2 5035.67 512kb single bios which you should use if you like to have an Xecuter bios.

    ok, I flashed the Bios with x2 5035.67 512k from Hexen 21, get a new booting screen and logo, but has still the problem that my xbox with new hdd don't load into the dash without an error.
    I'am also unable to come into the boot config with x or white botton 

  4. hello,

    I have an old xbox wie duox2 chip and xecuter2,

    I am not able to install a new IDE with 500GB .

    I' have tried with hexen 16 and and a Slayer 2.7 boot dvd bot every time I get Error 13 dashboard not found.

    The new HDD working with my PC, the box stars well with the old HDD and the Boot DVD ist startable from Dashboard, so I have no idea where the problem is.

    I format my new hdd with fatxplorer and copy the data from C and E from the old one with my xbox and FTPI don't get the error anymore but my xbox just boot to the blue logo with xectuer2 and then nothing happen.

    I there any other way I can try?

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.