Jump to content
OGXbox.com

Nf Given XD

Members
  • Posts

    50
  • Joined

  • Last visited

Everything posted by Nf Given XD

  1. So I did a bit of digging....and the reviews say this is an ORIGINAL Aladdin mod chip.i want to make sure before I get it... XT-4032 Machine Readable Original Mod Chip Suitable for XBOX1
  2. Thanks for that but I've been meaning to buy a programmer for it just haven't yet guess this will be the kick I need lol thank you again
  3. Or maybe i locked it in my inexperienced days? Anywhoo im curious as to if there is a way to unlock said drive without the eeprom..i still have the board but no power supply for it as i abandoned it and went to work on my 1.6 but i do still have the mobo and associated sister boards. Is my only hope resurrecting the 1.4 board or can i pull the eeprom without power to it? I have an Aladdin chip if i need to go that route...any help would be appreciated.
  4. Check the DVD tray power connector.i had the same issue on my 1.2 and it was very slightly loose and would spin up but wouldn't send data over the ide.if you unplug your hdd and still get this error...its the drive. "because when I unplugged the data cable it did not switch to an error code 8." Sorry disregard you have tried this sorry missed this statement. Can you boot the hexen disk from coldboot?
  5. It has to be the fatxplorer app not liking the adapter as I used a dummy drive I prepped and it did the same thing..
  6. Also to note I have a recovery disk(hexen2022) so if I could just full format the drive eeprom and all there I feel like that may be more ideal for what I'm planning to attempt
  7. If I unlock the drive.....because my xbox is chipped....and I have a few hdds to run it with....will that allow me to format it ? Cause if thats the case ill prep it with fatxplorer specifically to avoid issues in the future...as the app sees my 4tb just fine with the same "usb adapter" (mybook pro external taken apart to use as adapter) It just seems that this 1tb just ain't having it
  8. See thats the thing it works in the Xbox all works fine...it is locked to the eeprom...the problem is fatxplorer shoots a something montools error code 2 when I try to check the security sector to unlock it
  9. so update on this.I have the hdd formatted with all space on F and it shows it and all....However....FatXplorer wont see the drive correctly and error code 2...but the drive can be seen in explorer++ on windows 10...could this be caused by a partition size limit imposed on fatxplorer? update:Tried the suggested partition setup and still have the same results error code 2.
  10. could i use this to reflash my chip? https://www.ebay.com/itm/271313593344?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=271313593344&targetid=1264870805664&device=c&mktype=&googleloc=9011319&poi=&campaignid=14859008593&mkgroupid=130497710760&rlsatarget=pla-1264870805664&abcId=9300678&merchantid=6296724&gclid=EAIaIQobChMImryGoIri-QIV-mxvBB3BJQJmEAQYASABEgJ_n_D_BwE
  11. Ty for that info ill stick with XBPartitioner and then dump the eeprom to unlock the hdd after and then load it...again thank you highly appreciate it and you.
  12. Also...to that same post...would fatxplorer be able to format it correctly for a preload or no?
  13. Can I use that to change it?or is that the part thats RO?
  14. Okay thank you so much @KaosEngineeras always a huge help and very informative XBPartitioner 64kb cluster for max space it is again thank you
  15. I've walked through it with kaos engineer down to running a pinnout of the flash cart. See linked to catch up to this point lol:
  16. I have a 1.6 with a alladin xt +2 non flashable modchip...if I put a 1tb sata in it with starlink sata adapter and use hexen 2022 can I build a hdd in the 1tb?
  17. Thank you for the reply...however I did connect it to my pc....and I think its dead 0mb of 0mb cant repartition cant format...hell even fatxplorer says its unlocked
  18. So I have a question....and it may sound dumb but ill explain and hopefully one of you wonderful lads and gents will have the answer I need.... I had two 1tb 3.5 hdds one got locked to a burned out mobo on a 1.2 xbox... 1.can I format that drive without the hdd key? 2.I don't want the data off of it just want to wipe it. 3.Its a WD Blue series hdd. Hopefully someone can relay some info on this... [Mods feel free to put this in the right forum topic as I wasn't sure where this should go]
  19. 5-12 are connected to the 3.3 more may be i stopped at 12 as 13 was not connected to the 3.3

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.