llcgrizzly
Members-
Posts
14 -
Joined
-
Last visited
llcgrizzly's Achievements
-
Something like this?
-
Whats an install disc?? I don't think I have one of those.
-
Sorry, hdd AND disk drive disconnected***
-
Don't know if this helps but when I boot up without the HDD or disk drive connected, I get the bootloop still but I also get these error screen
-
I'll do my best, not very experienced with solider work. How does the close up photo look??
-
It's running xbmc. When I view the basic information through xbmc is says the build number is 1.0.4983.6 and the build is 1.1.0 Hope this helps
-
Goes into the same bootloop, nothing show on screen. It's very weird, once I get it to switch on correctly I can turn it on and off multiple times and it works fine. It's when I turn it off from the wall out let and on again or when it's left off got a while when the boot issue starts
-
Nothing, goes into it's boot loop, I tried pressing the eject button 3 times rapdibly again, only this time it didn't solve the issue. Keeping in mind once it boots correctly I have no issues with it what so ever
-
Thanks for the reply Dave. I've attached a couple photos
-
UPDATE: Turned XBOX on, Reboots 3 times, on last reboot the LED blinks green, the disc tray button works but the tray doesn't eject. However if i rapidly press the eject button 3 times and turn it off it fixes the issue, the next time i powered on it worked.... Really odd. Nothing shows on screen during any of this either. Once the xbox is powered up everything works perfectly including the disc tray.
-
llcgrizzly joined the community
-
Hey everyone, This is my first post on reddit, I've got an original Xbox that I bought already modded. I believe there's an issue with the boot process, its very temperamental. As you can see in the video it boots up and then almost instantly will shut off. Sometimes if i push the eject button twice rapidly and turn it off it'll turn on next time correctly and boot up. Note: Clock capacity has been removed and board has been extensively cleaned, I've tried a different power supply from a working XBOX also, that didn't work either. I'm pretty certain its a 1.2 revision. Its chipped with a SST clip. Was wondering if anyone has encounter this issue??
-
Hey everyone, This is my first post on reddit, I've got an original Xbox that I bought already modded. I believe there's an issue with the boot process, its very temperamental. As you can see in the video it boots up and then almost instantly will shut off. Sometimes if i push the eject button twice rapidly and turn it off it'll turn on next time correctly and boot up. Note: Clock capacity has been removed and board has been extensively cleaned, I've tried a different power supply from a working XBOX also, that didn't work either. I'm pretty certain its a 1.2 revision. Its chipped with a SST clip. Was wondering if anyone has encounter this issue??
Board Life Status
Board startup date: April 23, 2017 12:45:48