Josweet

Since buying the classic back in 2001 & modding it, then three more in 2004 & modding those also, this week i decided to crack them all open and get them back up together after many, many years of service.... untouched! The upgraded HDD's are getting noisy & the rom trays stopped working way back when, so i would just ftp games across. I have so far stripped & cleaned them thoroughly, desoldered the clock cap in two and fixed the rom draw trays in all consoles. ... however i need to advice on parts! At least one of the rom drives are failing to read discs so i want to replace the laser, as tweaking the potentiometer would be only be a temp fix imo. Where would be the place to go to buy * Replacement lasers * Timer caps ( this is what im considering atm) 5.5v/1F https://www.ebay.co.uk/itm/283213698254?hash=item41f0da14ce:g:exAAAOSw8-lccKry * Belts, as one of those is looking a little warped ? I found some stuff over at Aliexpress (modchips) but unsure about the rest Giving back>> I found that over time the case screws had become sloppy and would not tighten even though the top screw case standoff's were not cracked. which is the usual case. The internals of them are basically just bored out to much. To fix, i cut the end off a Cable tie (Zip tie) to match the length of the stand off and inserted it. Thats it, all tightened up as should be at the cost and ease of nothing Hope this help someone.