FlashX

I have The exact same issue!, did you ever figure it out? My conclusion is that it has to be some software issue in xbmc since it seems to work flawless in every other app. It Will happen to me sometimes upon booting into xbmc or when using IGR and I have to restart xbmc for lcd to start displaying again.. Very anoying.

Ye, figured it out. Problem was just The contrast settings in The arduino code. As it seems, my lcd need 100% contrast, Kinda strange but works fine now thx for the reply

BTW xbox is 1.6

Hi guys, I have a problem with the temp readouts in game. it dont show on the lcd, I have the arduino only setup, and soldered the two wires to the lpc port and the soldering is good, LCD are working good in xbmc and every other app. first i had a problem with lcd not working in xeniumOS this was due to the default contrast in the arduino code, hade to change it to 0 and now its working, just cant get the in-game temp read outs, hope anyone know how to fix,

Hi there, thats a Nice thing to find at The receclying center it's a team executer xbox, they made these back in The Day, i dont know exactly how rare they are, but I see them on Ebay sometimes for like 250-350 bucks. About The buttons, as far as I understand are for switching between different bios. So you can store different bios on The chip and then choose wich one you want to boot into using The Buttons, The leds Will i dicate which bios is running.

Hi everybody, i'm new here and this Will be my first post. I am new to original xbox modding, and I just recently installed an openxenium modship on my 1.6b xbox. I've also done The spi2par2019 lcd mod from ryze119. So now to my issue, when im using Xbmc and dvd2xbox lcd is working perfect, however when im booting into xenium OS lcd shows a couple of random strange looking symbols. My thoughts are that this could be due to some settings because here is the thing, first time i booted up into xbmc same thing happened where lcs showed some strange characters. And this were fixed simply by changing some settings in the xbmc lcd settings, and the reason this was happening whas due to The backlight were set by deafult to 80% and since ive done The arduino only installation (no backpack) i dont have backlight controll, so i set it to 100 percent and everything worked fine after that. So my guess is that it might be some similar issue happening in xenium OS where maybe some deafult lcd settings is causing issues and I cant find any way to change lcd settings in xenium OS, does Anyone know if its possible? Or have an idea of whats going on? Its really a small issue since its just happening in xenium OS and works perfect in every other app but it just anoys me, hope someone can help, i'd appreciate it.